CASSETTE ADAPTOR
The car cassette adaptor allows you to use your CD player with your car stereo cassette system.
1.Insert the car cassette adaptor in the same direction as you would insert an audio cassette tape, with the side marked THIS SIDE UP facing upwards.
2.If the car cassette adaptor cord is on the wrong side of the tape, reposition the cord by following the instructions below.
3.Insert the car cassette adaptor stereo plug into the LINE OUT jack on the right side of the CD player.
4.Turn on the cassette player. Press the PLAY button on the cassette player.
5.Press the PLAY button on the CD player.
6.Adjust the VOLUME control on your cassette player.
7.When done, leave the cassette player on and first eject the adaptor, then turn off cassette player.
Reposition the cord
The cord should extend out from the cassette player when the cassette is inserted (direction depending on your tape player).
1.To reposition the cord, remove the top plate by removing 2 screws with a dime (see Fig. 1).
2.Reposition the cord so that it comes out from other positions (see Fig. 2).
3.Replace the cover and the screws.
TO LINE OUT JACK
Fig. 1 | Fig. 2 |
Remove two | Move cord to |
large screws | desired position |
with a dime or | (three cord |
screwdriver | positions) |
NOTE: The car cassette adaptor has the play head on one side only. If the cassette adaptor keeps ejecting out, or the sound is weak, press the REVERSE button on your cassette player to change direction or reverse the adaptor.
CONNECTING TO HOME STEREO SYSTEMS
The LINE OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the cable’s mini plug to the LINE OUT jack on your player, and the other appropriate end usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
YOUR CD PLAYER | YOUR STEREO |
| SYSTEM |
TO LINE OUT JACK | OPTIONAL CABLE (3.5mm) TO AUX IN JACKS |
| TO RCA JACKS |
5