Exmark Quest Bagger Installing the Discharge Baffle 52 Deck Only, Installing the Bagger Blades

Page 11

Installing the Discharge Baffle – 52” Deck Only

Parts needed for this step:

Description

Qty.

Baffle, Discharge 52”

1

Bolt, Carriage 5/16-18 x 3/4

2

Nut, Nyloc 5/16-18 Flg

2

Procedure:

1.Remove the fasteners in the deck as shown in Figure 10. Retain for reuse if the discharge baffle is removed.

2.Install the 52” discharge baffle as shown in Figure 10.

 

 

Figure 10

1.

Nut

2. Discharge baffle

3.

Screw

 

 

 

 

Note: This baffle can stay on the machine while side discharging or mulching.

Note: These parts may be discarded if mounting to 48” unit.

Installing the Bagger Blades

Parts needed for this step:

Description

Qty.

Blades, 48” or 52”

3

Procedure:

1.Install the blade onto the spindle shaft (Figure 11).

Important: The curved part of the blade must be pointing upward toward the inside of the mower to ensure proper cutting.

+

 

 

Figure 11

1.

Blade

2.

Sail area of blade

3.

Bushing

4.

Spring disk washers

5.

Blade bolt

+ Orientation of washers

2.Hold the blade end using a rag or thickly- padded glove (or place a wrench on the top sheave nut). Install the bushing, two spring disk washers (cupped side toward the blade) and blade bolt (Figure 11).

3.Torque the blade bolt to 45-55 ft-lbs (61-75 N-m).

Incorrect installation of the blade or components used to retain the blade cause the blade to come loose and could seriously injure or kill you or bystanders.

Always install the original Exmark blades, blade bushing, spring disk washers and blade bolts as shown.

Note: Refer to mower operator’s manual for blade maintenance.

11

Image 11
Contents MFG. CO. INC Introduction Contents SpecificationsPreparation SafetyThink Safety First TrainingSlopes Slope Chart Safety and Instructional Decals Procedure SetupInstalling the Weight Installing the Hitch BracketInstalling the Hood and Bags Installing the Boot Mount Bracket and Tubes Installing the Bagger Blades Installing the Discharge Baffle 52 Deck OnlyClearing Obstructions from the Bagger OperationEmptying the Grass Bags Removing the Bagger Operating Tips Replacing the Discharge DeflectorSigns of Plugging Bagging SpeedBagging Long Grass Bagging Wet GrassMaintenance Procedure MaintenanceMaintenance Service Interval Storage Tips and Troubleshooting For units purchased on or after January 1 See EXMARK’S Complete Line of Accessories

Quest Bagger specifications

The Exmark Quest Bagger is a state-of-the-art grass collection system designed for professional landscapers and homeowners alike. This innovative product is specifically engineered to enhance the efficiency and effectiveness of lawn maintenance. Its compatibility with various Exmark mowers makes it a must-have accessory for anyone looking to optimize their mowing experience.

One of the standout features of the Exmark Quest Bagger is its robust collection capacity. With a generous volume, it allows for extended mowing sessions without frequent stops for emptying. This is particularly beneficial for larger lawns or commercial properties, where time-saving is paramount. The design ensures that grass clippings, leaves, and other debris are collected efficiently, leaving behind a clean and well-cut lawn.

The Quest Bagger employs advanced technology to ensure optimal airflow and suction. Its integrated fan system enhances the bagging process, providing superior performance regardless of grass type or moisture level. This feature significantly reduces clumping and ensures a consistent finish. Paired with Exmark’s premium cutting decks, the Quest Bagger captures clippings effectively, contributing to a polished mowing result.

Durability is another critical characteristic of the Exmark Quest Bagger. Built from high-quality materials, it is engineered to withstand the rigors of frequent use in various environments. The heavy-duty frame and reinforced bags ensure that it can handle heavy loads without compromising performance. This resilience not only extends the product life but also reduces maintenance costs for users.

Ease of installation and operation is a significant advantage of the Quest Bagger. It can be easily attached or detached from compatible Exmark mowers, making it user-friendly for landscapers who require flexibility. The design incorporates features that allow for quick access to the bags for hassle-free emptying, ensuring minimal disruption during mowing tasks.

Moreover, the Quest Bagger’s sleek and compact design contributes to enhanced maneuverability. Whether navigating tight corners or working in less accessible areas, this bagger enhances the overall mowing experience.

In summary, the Exmark Quest Bagger combines capacity, advanced air management technology, durability, and ease of use, making it an essential addition for anyone serious about lawn care. By investing in the Quest Bagger, users can enjoy a cleaner, more efficient mowing experience, ultimately leading to a healthier and more aesthetically pleasing lawn.