Exmark 4500-420, QDS manual Bagger Removal for Side Discharge

Page 12

Operation

have stopped before clearing blower assembly or mower deck

3.To empty the hopper, first shut off deck drive. Lift up on the handle to open the door and empty the hopper. If the unit is to be driven onto a truck or trailer with the hopper full, always back the unit up the ramp. This will reduce the chance of rearward tip up. See the Transporting section for additional information regarding loading a unit on a truck or trailer.

4.Close and latch the door before continuing mowing. Do Not engage the cutting blades while the door is in the open position.

Tips for mowing conditions:

When mowing in areas with sandy soil, use low lift blades on the cutting deck and higher cutting heights to minimize wear on the blower components.

When mowing in wet conditions, such as just after a rain or in heavy dew, use low lift blades on the cutting deck to minimize plugging of the blower.

Maintaining a ground speed that does not pull down the engine RPM will allow for the highest productivity and best quality of cut. Bogging the engine RPM down by going too fast will cause plugging and quality of cut issues.

When the hopper gets full, the sound of the blower will change and there will be slight blowout from the front right corner of the deck. Emptying the hopper at this point will minimize the potential for the tube to plug.

For units below Serial Number 600,000: Anti-blowout kits are available for leaf collection. They help to prevent “chasing” the leaves. To reduce “plowing” leaves, raise the deck slightly.

On Triton: Raise front adjustable baffle to reduce plowing. Lowering front adjustable baffle may prevent “chasing”. Match discharge opening to Ultra Vac intake for best performance.

Bagger Removal for Side Discharge

1.Shut off the deck drive, stop engine and wait for all moving parts to stop. Remove key.

2.Remove the discharge tube by releasing the latch at the blower. Slide the tube off the blower outlet and remove the upper end from the hopper.

 

 

Figure 5

 

1.

Hopper Assembly

4.

Hairpin

2.

Tube

5.

Clevis Pin

3.Blower

3.Remove the belt cover by loosening the knobs.

CAUTION

The deck sheave will become very hot. Touching a hot deck sheave can cause severe burns.

Allow the deck sheave to cool completely before removing the belt.

 

 

Figure 6

 

1.

Hairpin

4.

Belt shield

2.

Chute pivot pin

5.

Weight

3.

Discharge chute

6.

Knob

4.Pull the idler release handle and remove the belt from the upper groove of the deck sheave.

5.Unlatch the front end of the blower. Pivot the blower back and lift it off the deck.

12

Image 12
Contents Ultra VAC QDS All Rights Reserved Introduction Contents Safety Safety Alert SymbolSafe Operating Practices Slope Operation Maintenance and Storage Safety and Instructional Decals 103-3508 Specifications DimensionsModel Numbers SystemsProduct Overview OperationPre-Start Operating InstructionsHave stopped before clearing blower assembly or mower deck Bagger Removal for Side DischargeBagger Installation for Bagging Transporting Transporting a UnitLoading a Unit Operation Maintenance Check Blower Housing/ImpellerCheck Door Cloth Mesh Lubricate Grease Fittings Check Condition of BeltAdjustments Clean Muffler and Rear Frame Area Clean Rear Screen In HoodClean Blower Troubleshooting Problem Possible Cause Corrective ActionExmark Commercial Attachments and Accessories Service Record Page See EXMARK’S Complete Line of Accessories and Options

4500-420, QDS specifications

The Exmark QDS 4500-420 is a versatile and innovative attachment system designed to enhance the functionality of Exmark’s mowing equipment. The Quick Disconnect System (QDS) allows users to easily attach and detach accessories, transforming a standard mower into a multi-functional machine suitable for a variety of landscaping tasks. This significant feature streamlines operations, saving time and boosting productivity for professionals in the lawn care and landscaping industries.

One of the standout characteristics of the QDS 4500-420 is its user-friendly design. The quick-connect feature enables operators to switch between attachments such as baggers, aerators, and spreaders with minimal effort. This adaptability allows for seamless transitions between different jobs, ensuring that users can tackle any landscape challenge efficiently and effectively. The intuitive mechanism offers a secure fit, eliminating wobbles and providing peace of mind during operation.

In terms of technology, the Exmark QDS 4500-420 integrates advanced engineering principles to enhance durability and performance. The robust construction is designed to withstand the rigors of everyday use, showcasing Exmark's commitment to quality craftsmanship. The attachment system is engineered to maintain a consistent performance level, whether it's used for commercial applications or residential projects.

Another notable feature of the QDS 4500-420 is its compatibility with various Exmark models. This compatibility broadens its appeal by ensuring that a wide range of users can benefit from its innovative functionalities. This adaptability is complemented by user support, ensuring that operators can attain maximum efficiency and effectiveness with their Exmark equipment.

The QDS 4500-420 is designed with the professional landscaper in mind, addressing the common challenges they face in the field. By offering a solution that reduces downtime and enhances versatility, Exmark has established itself as a leader in landscaping innovation. This attachment system is not just about convenience; it is about empowering professionals to perform at their best.

In summary, the Exmark QDS 4500-420 is a game-changing attachment system that enhances the utility of Exmark mowers. With its user-friendly quick disconnect feature, durable construction, and broad compatibility, it represents a significant advancement in landscape management technology. This innovative system allows users to maximize their investment in equipment and take on diverse landscaping tasks with confidence and ease.