Flymo 350 Plus manual Assembly Instructions, How to Fit the Bag

Assembly Instructions

A

1

C

1

2

B

1

2

3

D

1

2

Lower Handle Assembly (A)

1.Lift the grassbox lid and remove the grassbox.

2.Insert the lower handle into the handle slots, ensuring that the holes are aligned.

3.Insert the pins and secure with the retaining clips (A1).

4.Replace the grassbox, and lower the grassbox lid

carefully.

Upper Handle Assembly (B)

1.Insert the nut into the handle knob (B1).

2.Align the holes in the upper and lower handles and secure with the bolt, washer and wing knob (B2).

3. Fit the cable to the handle with the clips provided (C3). Make sure the cable is not trapped between the upper and lower handles.

Cable Winder Assembly (C & D)

1.Insert cable winder attachment onto left upper handle as viewed from rear of product (C1).

2.Insert cable winder onto attachment and turn downward to secure. (C2).

3.Continue turning the cable winder downward (D1) until it can be located onto the top of the lower handle (D2).

How to Fit the Bag

E Fit bag

Using with the Bag (E)

1.Lift the grassbox lid. The grassbox will move into an upright position.

2.Insert the bag into the grassbox. Secure the bag by turning the edges over the rim of the grassbox, as indicated on the bag.

3.Lower the grassbox lid carefully. Do not drop.

4.Make sure that the grassbox lid is closed correct- ly, ensuring that there is no grass trapped between the grassbox lid and the hood.

•Please note, this product can be used with or without the bag.