Fault Finding Hints
Fails to Operate
1.Is the correct Starting procedure being followed? See ‘To Start your Lawnmower’
2.Is the Power Turned On?
3.Check the fuse in the plug, if blown replace.
4.Fuse continues to blow?
Immediately disconnect from the mains electricity sup- ply and consult your local approved Service Centre.
Poor Grass Collection
1.Disconnect from the mains electricity supply.
2.Clean the outside of the air intakes, the discharge chute and the underside of the deck.
3.Raise to a higher height of cut. See Cutting Height Adjustment.
4.Clean Fan Blades.
5.If poor collection persists.
Immediately disconnect from the mains electricity sup- ply and consult your local approved Service Centre.
Excessive Vibration
1.Disconnect from the mains electricity supply.
2.Check that the Blade is fitted correctly?
3.If the blade is damaged or worn, replace it with a new one.
4.If vibration persists, turn the Blade through 180o by first loosening the Blade Bolt, turning the Blade and
5.If vibration persists?
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre. Lawnmower becomes heavy to push
1.Disconnect from the mains electricity supply.
2.In long grass or uneven ground, the height of cut should be raised to a higher position. See Cutting Height Adjustment.
3.Check that the wheels can rotate freely.
4.If problem persists?
Immediately disconnect from the mains electricity sup- ply and consult your local approved Service Centre.
Service Recommendations
1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
2.Always use genuine Flymo Spare Parts.
3.Prepacked spares are available from most Husqvarna Outdoor Products stockists.
4.Your product is uniquely identified by a silver and black product rating label
5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.
6.Should it be necessary for work to be carried out by your
Service Centre, it is important to take your complete machine including cable and any extension cables used.
A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre.
Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna Outdoor Products in any manner whatsoever.
Environmental Information
Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when dis- posing of
•If necessary, contact your local authority for disposal informa- tion.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help pre- vent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your household waste dis- posal service or the shop where you purchased the product.
Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna Outdoor Products, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty adjust- ment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products.
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used commercially.
*This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is impor- tant that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:
Failures not covered by guarantee
*Replacing worn or damaged blades
*Failures as a result of not reporting an initial fault.
*Failures as a result of sudden impact.
*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.
*Machines used for hire are not covered by this guarantee.
*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Blades, Electric Mains cable.
*Caution!
Husqvarna Outdoor Products does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna Outdoor Products, or by the machine having been modified in any way.