Gefen GTB-HD4K2K-148 user manual Using Slow Mode, Set to Slow position

Page 19

Operating the 1:8 Splitter for HDMI 4K x 2K

Setting the Switching Mode

Using Slow Mode

When set to slow switching mode, the 1:8 Splitter for HDMI 4K x 2K will follow the standard authentication process, based on the HDMI and HDCP specifications. Slow mode is recommended when the source does not support multiple devices.

1.Disconnect the power supply from the splitter.

2.Set the FST switch to the Slow position.

Set to the

Slow position

3.Reconnect the power supply to the splitter.

If the FST switch is moved from the Fast position to the Slow position while the splitter is powered, then power-cycle the splitter by disconnecting and reconnecting the power supply in order for the change to take effect.

page 9

Image 19

Contents 3GSDI General Safety Information Important Safety InstructionsProduct Registration Warranty InformationContacting Gefen Technical Support Operating Notes Features Features and Packing ListPacking List Page Table of Contents Page Page Getting Started Panel Layout Panel Layout Sample Wiring Diagram Connecting the 18 Splitter for Hdmi 4K x 2KPage Page Operating Splitter for Hdmi 4K x 2K Set to Fast position Setting the Switching ModeWhat is Fast Switching Technology? Using Fast ModeSet to Slow position Using Slow ModeUsing 2-Channel Audio Setting the Audio Channel ModeSet to the 2ch position Set to Using Multichannel AudioUsing the Internal Edid Setting the Edid ModeSet to the Int position Set to the Ext position Using the External EdidPage Appendix Wall Mounting Instructions Firmware Upgrade Procedure Specifications Page This product uses UL or CE listed power supplies