Operating the 1:4 Splitter for HDMI 4K x 2K
Setting the Audio Channel Mode
Using Multichannel Audio
Use this audio mode when the connected displays (and/or other sink devices) are capable of supporting various audio formats.
1.Disconnect the power supply from the splitter.
2.Set the EDID switch to the Int position.
3.Set the Audio switch to the
Set to the
Multi-ch position
4.Reconnect the power supply.
If either the EDID or Audio switch are moved to another position while the splitter is powered, then
5.When the Audio switch is set to the
Audio Format | Audio Format |
LPCM 2CH | LPCM |
Dolby® Digital | Dolby® Digital Plus |
Dolby® TrueHD | DTS® |
MLP (PPCM) |
page 11