Gefen GTB-HD-SIGGEN user manual Selecting the Timing

HD PATTERN SIGNAL GENERATOR SOFTWARE

Selecting the Timing

1.Use the Timing Select button to select the timing / resolution of the output signal.

2.Press the SET button to set the timing.

Select the timing in the Timings window

Retrieves the current	Click the SET button
settings	to enable the timing

After changing a timing, pattern, the output format, or toggling HDCP, make sure to press the Refresh button on the left side of the window. The HD-SIGGEN Status window is not automatically updated, even if a change has been made through the software or using the front panel. Clicking the Refresh button will retrieve the current settings from the HD Pattern Signal Generator. Otherwise HD-SIGGEN Status window will display “Link Error”.

44