Hayter Mowers 481A manual Oil Service, Air Cleaner Service

Page 20

MOWER MAINTENANCE

Oil Service

Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions.

Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:-

1.Drain fuel by running the engine until the fuel tank is empty.

2.Remove the spark plug lead.

3.Allow the engine to cool.

4.Drain the oil while the engine is warm.(Not hot)

5.Tip the mower over on to its left hand side thus ensuring that the air cleaner is kept uppermost to prevent engine damage.

6.Remove the oil filler dipstick and drain the oil into a suitable container.

7.Refill with new oil of the recommended SAE viscosity grade. (Refer to-‘Before Starting the Mower’)

Air Cleaner Service

3

4

 

 

1

 

 

To service the air cleaner, loosen screw (1) and remove cover (2).

 

 

 

 

 

 

Carefully remove pre-cleaner (3) and wash in a solution of liquid

 

 

 

detergent and water. Allow to air dry thoroughly before fitting.

 

 

5

Remove cartridge (4) and clean by tapping gently on a flat surface. If

 

2

very dirty, replace.

 

 

 

 

 

-Do not use petroleum solvents.

-Do not use pressurised air.

-Do not oil the cartridge.

After servicing, install the pre-cleaner and cartridge in the cover. Insert the tabs on the bottom of the cover into the slots in the bottom of the base (5). Tilt the cover upwards and securely tighten the screw to the base.

1.20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Harrier Specifications Main Features /SPECIFICATIONSMain Features Contents Introduction Warranty Limited WarrantySafety Precautions Safety Alert SymbolTraining PreparationOperation Maintenance & Storage Stop the engine and disconnect the spark plug leadSafety Symbols Decal SymbolsDelivery Checklist Adjust Handlebar HeightAssembling the Mower HandlebarBefore Starting the Mower Prevent Engine DamageOil Type Check Oil LevelOperating the Mower ControlsStarting Step StepForward Travel TurningStopping Slopes+ Height of Cut Before MowingGrassbag Without Grass CollectionFriction Disc Non-Grassed AreasLawn Care Calendar August SeptemberOctober NovemberMaintenance Schedule Mower Maintenance Throttle Cable AdjustmentCarburettor Adjustments EngineOil Service Air Cleaner ServiceSpark Plug Service Keeping Engine CleanSecuring Nuts & Bolts Deck HousingClutch Cable Adjustment Lubrication Cutterblade RemovalCutterblade Assembly Cutterblade SharpeningStorage Battery Charging To recharge the batteryTrouble Shooting Problem Possible Fault RemedyTrouble Shooting Declaration of Conformity EC Declaration of ConformityParts List Item no Description QTY Item NoteParts List Parts List 102 109 103 100 104 105 Customer Information /NOTES TypePetrol Rotary

481A specifications

The Hayter Mowers 481A is a sophisticated and robust lawn mower designed to meet the needs of both residential and commercial users. Known for its durability and efficiency, this model has gained popularity among lawn care enthusiasts and professionals alike.

One of the standout features of the Hayter 481A is its 48cm (19 inches) cutting width. This size allows for efficient mowing of medium to large lawns, providing a perfect balance between maneuverability and coverage. The cutting height can be easily adjusted, offering a range from 13mm to 60mm, enabling users to achieve their desired grass length with ease.

The 481A is equipped with a powerful Briggs & Stratton engine, known for its reliability and long-lasting performance. This engine not only provides ample power but also ensures smooth operation, making the mowing experience straightforward and enjoyable. The mower's self-propelling feature further enhances its usability, allowing users to navigate various terrains without the need for excessive effort.

Another significant characteristic of the Hayter 481A is its unique 4-in-1 cutting system. This system allows for multiple options including rear discharge, side discharge, mulching, and collection. The mulching function is particularly beneficial as it finely cuts and distributes clippings back onto the lawn, acting as a natural fertilizer.

In terms of build quality, the Hayter 481A is built with a robust aluminum chassis, ensuring increased longevity and resistance to rust. Its large rear wheels provide excellent traction and stability, especially on uneven surfaces, while its compact design allows for easy storage.

The mower also features a large grass collection bag, which is designed to minimize clumping and maximize airflow, ensuring efficient collection of clippings. With a capacity of up to 60 liters, it minimizes the need for frequent emptying.

User comfort has not been overlooked in the design of the Hayter 481A. The adjustable handlebars allow for tailored heights, reducing strain during use, while the quick-release mechanism ensures that the mower can be folded and stored easily.

Overall, the Hayter Mowers 481A combines powerful performance, innovative features, and user-friendly design, making it an excellent choice for anyone looking to maintain a pristine lawn with minimal effort. Its advanced technology and thoughtful engineering set it apart in the competitive landscape of lawn care equipment.
Top Page Image Contents