Hayter Mowers 72620, 71620, 74824 Maintenance and Storage Safety, Towing Safety, Battery Safety

Page 7

Safety

1.5 MAINTENANCE AND STORAGE SAFETY

NOTE

1. Replace any missing or unread-

able safety decals. Refer to the

 

If equipped, see engine owners

parts manual for part numbers

manual or contact the engine manu-

when ordering safety decals from

facturer for engine safety instruc-

an area Bear Cat dealer.

tions and decals.

 

 

 

2.Store the machine out of reach of children and where potential fuel vapors will not reach an open flame or spark.

3.Allow machine to cool before stor- ing in an enclosure.

1.6 TOWING SAFETY

1.Rotate the discharge tube to face the opposite direction of the tow- ing vehicle before towing. This pre- vents the discharge tube from pro- jecting over the trailer wheels and striking foreign objects.

2.Connect hitch safety chains. Tighten and secure trailer hitch bolts. Do not attempt to tow the trailer if vehicle is not equipped with a 2” ball.

3.Do not exceed maximum towing speed, indicated on tire sidewall. Inflate tires to manufacturers specs as stated on the tire sidewall.

4.Check wheel lug bolts periodically to ensure they are tight and se- cure.

5.Make sure the jack stand on trailer is in the UP position to clear the ground during towing. Place the jack stand on a level surface and

secure it in the DOWN position be- fore use.

6.Never allow passengers to ride on the chipper chute while the vehicle is moving, whether the chipper is running or not.

7.If applicable, shut off fuel supply when towing.

1.7 BATTERY SAFETY

1. Improper use and care of the bat-

tery on electric start models can

result in serious personal injury or

property damage. Always observe

the following safety precautions:

2. Poison/Danger - Causes Severe

Burns. The battery contains sulfu-

ric acid. Avoid contact with skin,

eyes or clothing. Keep out of

reach of children.

ANTIDOTE-External Contact:

Flush immediately with lots of wa-

ter.

ANTIDOTE-Internal: Drink large

ANTIDOTE-Eye Contact: Flush with water for 15 minutes. Get prompt medical attention.

3.The battery produces explosive gases. Keep sparks, flame or cigarettes away. Ventilate area when charging battery. Always wear safety goggles when work- ing near battery.

4.The battery contains toxic materi- als. Do not damage battery case. If case is broken or damaged, avoid contact with battery contents.

Neutralize acid spills with a bak- ing soda and water solution. Prop- erly dispose of a damaged or worn- out battery. Check with local au- thorities for proper disposal meth- ods.

5.Do not short circuit battery. Se- vere fumes and fire can result.

6.Before working with electrical wires or components: disconnect bat- tery ground (negative) cable first. Disconnect positive cable second. Reverse this order when reconnect- ing battery cables.

quantities of water or milk. Follow

with milk of magnesia, beaten egg

or vegetable oil. Call a physician

immediately.

DANGER / POISON

 

 

 

 

 

 

 

 

 

 

FLUSH EYES

 

 

 

 

 

 

 

 

 

 

IMMEDIATELY

 

 

 

 

 

 

 

 

 

SHIELD EYES

 

NO

 

 

 

SULFURIC

 

 

 

WITH WATER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXPLOSIVE GASES

 

 

 

 

ACID

 

 

 

GET

 

 

 

 

 

 

 

 

 

 

 

 

CAN CAUSE

 

• SPARKS

 

 

 

CAN CAUSE

 

 

 

MEDICAL

 

 

 

 

 

 

BLINDNESS OR

 

• FLAMES

 

 

 

BLINDNESS OR

 

 

 

HELP

 

 

 

 

 

 

INJURY

 

• SMOKING

 

 

 

SEVERE BURNS

 

 

 

FAST

 

 

 

 

 

 

 

 

 

 

KEEP OUT OF THE REACH OF CHILDREN. DO NOT TIP. KEEP VENT CAPS TIGHT AND LEVEL.

6" & 8" Bear Cat Chipper Operator’s Manual

Page 3

Image 7
Contents Owner OPERATOR’S Manual Emission Information Please Send US Your Warranty CardBefore you Begin Dear Bear CAT CustomerLimited Warranty Contents Safety Alert Symbol SafetyBefore Operating Operation Safety SafetyTowing Safety Maintenance and Storage SafetyBattery Safety Assembling the Machine AssemblyInstalling the Battery AssemblyMachine Controls ControlsStarting the Machine OperationRotating the Chipper Base OperationStopping the Engine ChippingControl ARM Operation Models 72620 Hydraulic Feed Operation Models 72620Hydraulic Feed Component Locations Models 72620 Sharpening Chipper Blades Service & MaintenanceSetting Chipper Blade Clearance Service and MaintenanceAdjusting Drive Belts Clearing Plugged Rotor Replacing Drive BeltsGreaseable Bearings and Pivots Repairing or Replacing RO- TOR BearingsOther Service Tips Trailer Service TipsPump Component LOCA- Tions Models 72620 Hydrostatic Pump Start UP Procedure Models 72620Adding Hydraulic Fluid Hydraulic Feed MAINTE- Nance 72620General Troubleshooting TroubleshootingHydrostatic Pump Troubleshooting Models 72620 TroubleshootingSpecifications SpecificationsBolt Torque SpecificationsManufactured United States of America By Crary Company

72620, 71620, 74824 specifications

Hayter Mowers is well known for its high-quality garden equipment, particularly its advanced and robust mowers. Among their popular models, the Hayter 74824, 71620, and 72620 stand out, each designed to meet diverse lawn care needs. These mowers showcase innovative technologies and features that enhance performance and user experience.

The Hayter 74824 is renowned for its powerful performance, specifically designed for larger gardens. It is equipped with a robust engine capable of delivering consistent power for various grass types, ensuring efficient mowing even in challenging conditions. Its cutting width of 48 cm allows for faster mowing, while the adjustable cutting heights cater to different grass lengths, accommodating various lawn care preferences. The 74824's unique feature is its variable speed drive, providing operators with optimal control over the mowing pace, making it easier to navigate around obstacles in the garden.

The Hayter 71620 is a more compact model, ideal for medium-sized lawns. It combines ease of use with high efficiency. Featuring a 41 cm cutting deck, this mower offers excellent maneuverability, which is especially useful in smaller areas. The 71620 includes an easy-start engine technology, enabling hassle-free ignition and improved reliability. Additionally, its grass collection system is designed for maximum efficiency, ensuring minimal clippings are left behind to maintain your lawn's aesthetics.

The Hayter 72620 serves as another excellent option for homeowners seeking a reliable mowing solution. Similar in features to the 71620, it offers a slightly wider cutting deck at 46 cm, delivering more coverage while maintaining the same power efficiency. Equipped with a hybrid grass bag that optimizes airflow, the 72620 enhances grass collection effectiveness, promoting a neat finish. Its ergonomic handle design makes it comfortable to operate for extended periods, reducing fatigue for the user.

All these models are built with high-quality materials, ensuring durability and long-lasting performance. Furthermore, Hayter's commitment to environmental sustainability is showcased in these mowers' efficient fuel consumption and reduced emissions, making them an environmentally responsible choice.

In summary, the Hayter 74824, 71620, and 72620 are exemplary choices in lawn care, each model catering to specific needs with innovative features, efficient performance, and user-friendly designs. Whether for expansive lawns or compact gardens, Hayter mowers deliver exceptional results, revolutionizing the way we care for our outdoor spaces.