Lenoxx Electronics CD-1095 manual Trouble Shooting, General, CD player Radio

Page 14

TROUBLE SHOOTING

General

Problem

The power is not on.

There is no sound.

Remedy

Connect the AC power cord to a wall outlet securely.

Make sure the batteries are inserted correctly and they are fresh.

Make sure the FUNCTION switch is at the right position as you want.

Adjust the volume.

Unplug the headphones when listening through speakers.

CD player

Radio

” appears in the display even when a CD is in place.

CD does not play.

The sound drops out.

CD does not play while radio may continue to play.

The sound is weak or has poor quality.

Insert the CD with the label side up.

Make sure that the CD compartment is closed.

Place the CD with the label side up.

Clean the CD.

Take out the CD and leave the CD DOOR open for about an hour to dry moisture condensation.

Make sure the FUNCTION switch is at CD position.

Clean the CD, or replace it if the CD is badly damaged.

Place the player in a location free from vibration.

Check if your batteries are fresh.

It is normal since the radio uses less power than the CD player.

Replace all the batteries with new ones if they are weak, or bring the set near a window, or rotate the set.

13IB-CD1095(SY)-WM-E-031604

Image 14
Contents Compact Disc Player Important Safety Instructions Additional Safety Instructions Battery Safety Instructions Using the player on batteries Choosing the Power SourcesConnecting the AC power cord Playing a CD Press or Adjust USE These Buttons for Additional OperationsPlaying CD Tracks Repeatedly Repeat Play Display showsSelecting Your OWN Music Playing Order Programmed PlayListening to the Radio To improve broadcast reception On Power Sources PrecautionsOn Safety On PlacementCleaning the Cabinet Precautions Notes on CDsMaintenance Cleaning the Lens CD player Radio Trouble ShootingGeneral CD Section SpecificationGeneral Description Radio SectionLimited Warranty For customer service dial