ASSEMBLY
UNPACKING INSTRUCTIONS | CONTAINER CONTENTS |
| |||
• Remove all parts and packing materials from | • | Blower Assembly | • | Containers | |
| carton. | • | Belt | • | Seal Fastening Kit |
|
| ||||
TOOLS REQUIRED | • | Mounting Brackets | • | Bag of Hardware | |
• | 7/16" Wrench or ratchet and socket |
|
|
|
|
• ½" Wrench or ratchet and socket |
|
|
|
| |
• | ¾" Wrench |
|
|
|
|
•Drill and 3/8" bit
• | Torque Wrench | Upper Chute |
• | Hacksaw |
|
• | Hammer |
|
|
| Bag Dump |
|
| Indicator |
Middle Chute
Belt Cover
Blower Housing
NOTE: When right hand (RH) and left hand (LH) are mentioned in this manual, it means when you are seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
6