Husqvarna 338XPT, 334T, Chain Saw manual Assembly 336, 339XP

SAFETY EQUIPMENT

Assembly 336, 339XP

Assemble the parts as follows:

1.Attach the throttle wire (H) to the steel wire and pull back the steel wire and throttle wire through the tank unit.

2.Connect the throttle wire (H) to the throttle valve (I) and then fit the carburettor cover.

3.Connect the throttle wire (H) to the throttle trigger (G).

4.Fit the throttle trigger (G) by pushing it upwards and forwards at an angle.

5.Fit the spring (F) and throttle lock (E). Engage the spring in the slot in the throttle trigger (G).

6.Fit the two pins (C and D).

7.Press both side covers into place (B).

8.Connect the leads to the stop button (A) and push it back into the handle.

I	H
	H
	E
	F

G

A C D

B

22 – English