Guarantee & Guarantee Policy, Fault Finding

Maintenance cont’

Transport

Remove the spark plug lead

Loosen the wire/cable from the handle before carefully folding it. Avoid damaging the wire/cable.

Empty the petrol tank. The machine must be drained of oil and fuel when moving it by public transport.

Service

When ordering spare parts, always quote the mower’s product number. Always check oil level after service.

At the End of the Mowing Season

1.Replace blade, bolts, nuts or screws, if necessary.

2.Clean your lawnmower thoroughly.

3.Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required.

4.Drain engine of oil.

Storing your Lawnmower

1.Do not store your lawnmower immediately after use.

2.Wait until the engine has cooled to avoid a potential fire hazard.

3.Clean your lawnmower

4.Store in a cool, dry place where your lawnmower is protected from damage.

Service Recommendations

Your product is uniquely identified by a silver and black product rating label.

We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. Engine Maintenance Schedule

Follow the hourly or calendar intervals, whichever occur first. More frequent service is required when operating in adverse conditions.

First 5 hours - Change oil.

Every 5 hours or daily - Check oil level. Clean finger guard. Clean around muffler.

Every 25 hours or every season - Change oil if operating under heavy load or high ambient temperature. Service air cleaner. Every 50 hours or every season - Change oil. Inspect spark arrester, if equipped.

Every 100 hours or every season - Clean cooling system*. Replace spark plug.

*Clean more often under dusty conditions, or when airborne debris is present or after prolonged operation

cutting tall, dry grass.

Engine Servicing & Guarantee

The engine fitted to your lawnmower is guaranteed by the Engine Manufacturer.

Fault Finding

Engine Will Not Start

1.Check that there is sufficient fuel in the tank and the cap air vent is clear.

2.Remove and dry the spark plug.

3.Petrol may be stale. Replace. Once petrol has been replaced, it may take a little time for fresh petrol to filter through.

4.Check that the blade bolt is tight. A loose bolt could cause difficult starting.

5.If the engine will still not start, immediately disconnect the spark plug lead.

6.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE. Lack of Engine Power and/or Overheating

1.Disconnect the spark plug lead and allow the engine to cool down.

2.Clean grass clippings and debris from around the engine and air inlets and the underside of the deck.

3.Clean the engine air filter (Ask your local Approved Service Centre to clean the engine air filter thoroughly).

4.Petrol may be stale. Replace. Once petrol has been replaced, it may take a little time for fresh petrol to filter through.

5.If the engine still lacks power and/or is overheating, immediately disconnect the spark plug lead.

6.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE. Excessive Vibration

1.Disconnect the spark plug lead.

2.Check that the blade is correctly fitted.

3.If the blade is damaged or worn replace it with a new one.

4.If vibration persists, turn the blade through 1800 by first loosening the blade bolt, turning the blade and re- tightening the blade bolt.

5.If vibration persists, immediately disconnect the spark plug lead.

6.CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd., through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:

(a)The fault is reported directly to the Authorised Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.

(d)The failure has not occurred through fair wear and tear.

(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna UK Ltd.

(f)The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used commercially.

*This guarantee is additional to, and in no way diminishes the customers statutory rights.Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:

Failures not covered by guarantee

*Replacing worn or damaged blades.

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.

*Machines used for hire are not covered by this guarantee.

*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim:

Blade, Electric Mains cable, belt.

*Caution!

Husqvarna UK Ltd. does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna UK Ltd., or by the machine having been modified in any way.

Service Recommendations

1.We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

2.Always use genuine Husqvarna Spare Parts.

3.Prepacked spares are available from most Husqvarna UK Ltd. stockists.

4.Your product is uniquely identified by a silver and black product rating label

5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.

6.Should it be necessary for work to be carried out by

your Service Centre, it is important to take your complete machine.

A network of specialist dealers can be found in your local Yellow Pages.

To obtain service on your Husqvarna product simply telephone or visit your local Service Centre.

Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

All of the centres listed stock genuine Husqvarna Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna UK Ltd. in any manner whatsoever.

965969401, 965969501, 965984501, 965984601, 965969301 specifications

Husqvarna is renowned for its commitment to high-quality lawn care equipment, and the models 965969201, 965969401, 965984601, 965969501, and 965969301 exemplify this legacy. These handheld power tools are designed to cater to various gardening and landscaping needs, whether for homeowners or professional landscapers.

One of the hallmark features of these models is their powerful engines. They are equipped with efficient, high-torque two-stroke engines that ensure optimal performance, enabling them to tackle tough tasks with ease. The engines are designed for low emissions and fuel consumption, which not only makes them environmentally friendly but also helps reduce operating costs.

Another notable feature is their ergonomic design. Each model incorporates a lightweight frame that allows users to maneuver easily while providing comfort during extended use. The adjustable harnesses are designed to distribute weight evenly, minimizing strain on the user’s back and arms. This thoughtful design is crucial for professionals who may spend hours working with these tools.

Technology plays a significant role in the performance of these models. They come equipped with advanced starting systems that simplify the ignition process. Features like the air purge system remove excess air from the carburetor and fuel system, enhancing starting reliability. These technologies ensure that users can get to work quickly without facing the frustration of difficult starts.

Durability is another key characteristic of the Husqvarna line. The materials used in construction are not only lightweight but also built to withstand the rigors of regular use. The blades, for instance, are forged from high-quality steel, ensuring they maintain sharpness and effectively slice through a variety of materials.

Safety features also receive significant attention in these models. They are equipped with vibration dampeners that reduce operator fatigue and minimize the risk of injury. Additional safety mechanisms prevent accidental starts and improve overall user control, making them suitable for both novice and experienced users alike.

Lastly, maintenance is streamlined with easy access to components for cleaning and servicing. This user-friendly approach extends the life of the tools, ensuring they run efficiently over the years.

In summary, the Husqvarna 965969201, 965969401, 965984601, 965969501, and 965969301 models are a testament to the brand's innovation in outdoor power tools. With their powerful engines, ergonomic designs, advanced technology, durability, and user-centric safety features, they are excellent investments for anyone looking to maintain their outdoor spaces effectively.