Husqvarna 87521HVE owner manual Lawn Mower

Page 12

MAINTENANCE

LAWN MOWER

Always observe safety rules when performing any main- tenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chem- icals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time you mow to be sure they move freely. The wheels not turning freely means trash, grass cuttings, etc., may be inside the drive wheel and dust cover area and must be cleaned out to free drive wheels.

If necessary to clean drive wheels, check both rear wheels.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not ap- proved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE (See Fig. 14)

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air fi lter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter-clockwise.

5.Remove blade and attaching hardware (bolt, lock washer and hardened washer).

TO REPLACE BLADE (See Fig. 14)

1.Position blade on the blade adapter aligning the two

(2)holes in the blade with the raised lugs on the adapter.

2.Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

3.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

4.Use block of wood between blade and lawn mower hous- ing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35–40 ft. lbs.

IMPORTANT: BLADE BOLT IS HEAT TREATED. IFBOLT NEEDS REPLACING, REPLACE ONLYWITHAPPROVED BOLT SHOWN IN THE REPAIR PARTS SECTION OF THIS MANUAL.

TRAILING EDGE

 

BLADE ADAPTER

 

 

 

 

LOCK

 

 

WASHER

 

HARDENED

BLADE

BLADE

WASHER

BOLT

FIG. 14

TO SHARPEN BLADE

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a fi le or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

GRASS CATCHER

•The grass catcher may be hosed with water, but must be dry when used.

•Check your grass catcher often for damage or dete- rioration. Through normal use it will wear. If catcher needs replacing, replace only with approved replace- ment catcher shown in the Repair Parts section of this manual. Give the lawn mower model number when ordering.

GEAR CASE

•To keep your drive system working properly, the gear case and area around the drive should be kept clean and free of trash build-up. Clean under the drive cover twice a season.

•The gear case is fi lled with lubricant to the proper level at the factory. The only time the lubricant needs at- tention is if service has been performed on the gear case.

•If lubricant is required, use only Texaco Starplex Pre- mium 1 Grease, Part No. 750369. Do not substitute.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 87521HVE Safe Operation Practices for Walk-Behind Mowers II. Slope OperationGeneral Operation III. ChildrenTable of Contents HOW to SET UP Your Mower To Remove Mower from CartonTo Unfold Handle See Figs To Prepare Battery To Install AttachmentsMeets Cpsc Safety Requirements Dual Point Height Adjuster Handle used toKnow Your Lawn Mower Operator Presence Control BAR must beHOW to USE Your Lawn Mower Engine SpeedEngine Zone Control When Converting Your Lawn Mower To Convert Mower See FigsSimple Steps to Remember Before Starting Engine To Empty Grass Catcher See FigsADD OIL See Fig ADD Gasoline See FigTo Stop Engine To Start EngineMowing Tips Mulching Mowing TipsLubrication Chart General RecommendationsBefore Each USE LubricationLawn Mower Cleaning Clean Under Drive CoverEngine MufflerTo Adjust Cutting Height Rear DeflectorTo Remove Drive Belt See Figs To Replace Drive Belt See FigsTo Adjust Handle See Fig CarburetorHandle See Figs Battery OtherFuel System Engine OILProblem Cause Correction II. Operacion Sobre LAS Cuestas OperacionIII. Niños IV. Manejo Seguro DE GasolinaResponsabilidades DEL Cliente ServicioEspecificaciones DEL Producto Para Remover LA Segadora DE LA Caja DE Cartón Como Preparar SU SegadoraPara Desdoblar EL Mango Vea la Figs y Para Preparar LA Batería Vea Fig Para Instalar LOS AccesoriosFamiliarícese CON SU Segadora Cumple CON LOS Requisitos DE Seguridad DE LA CpscMango del ajustador de un duel punto se usa para Palanca de control de la impulsion se usa para enComo Usar SU Segadora Velocidad DEL MotorControl DE Zona DEL Motor Para Convertir LA Segadora Vea la Figs Pasos Simples DE Recordar Cuando Convierta SU SegadoraAntes DE Hacer Arrancar EL Motor Para Vaciar EL Recogedor DE Césped Vea la Figs yAgregue Aceite Vea Fig Agregue Gasolina Vea FigConsejos Para Segar Para Parar EL MotorPara Hacer Arrancar EL Motor Consejos Para Segar Y AcolcharRecomendaciones Generales Tabla DE LubricaciónAntes DE Cada USO LubricaciónSegadora LlantasRuedas DE Impulsión Cuidado DE LA CuchillaMotor Caja DE EngranajesPara Cambiar EL Aceite DEL Motor Vea la Fig Filtro DE Aire Vea la FigLimpieza Para Cambiar LA Correa DE Impulsión Vea la Figs Para Ajustar EL Mango Vea la Fig CarburadorMango Vea la Figs y Otros Sistema DE CombustibleAceite DEL Motor CilindroProblema Causa Corrección Gearcase Assembly Part Number Rotary Lawn Mower - Model Number 87521HVEKEY Part NO. NO. Description Page KEY Part Description 532 42Page KEY Part Description Warranty Statement Déclaration DE Garantie RÉF Piéce Description Page Ensemble du Boîtier de Tondeuse à Gazon Page Description Pièce RÉF Solution Cause Problème StopAutres MoteurGazon À Tondeuse 23 et 22 .Figs les Voir Guidon23 .FIG 22 .FIGFig Voir Guidon LE Régler Pour Figs les Voir D’ENTRAÎNEMENTCarburateur Moteur DE Vitesse’ENTRAÎNEMENT Courroie LA DE Couvercle LE Sous Nettoyer Courroie LA Enlever PourArrière Déflecteur Coupe DE Hauteur LA Régler PourMoteur Nettoyage’ALLUMAGE Bougie Fig Voir AIR À FiltreLame DE Soin Vitesse DE BoîteHERBE-RAMASSE Motrices RouesGénérales Recommandations Lubrification DE TableauLubrification Utilisation Chaque AvantBROYER/TONDRE DE Conseils Tondre DE ConseilsMoteur LE Démarrer Pour Moteur LE Arrêter PourMoteur LE Démarrer DE Avant Fig Voir L’ESSENCE DE AjoutezFig Voir L’HUILE DE Ajouter 11 et 10 .Figs les VoirFigs les Voir Tondeuse LA Convertir PourFond à serré et fermé est latéral broyeuse de Leporte Fond à serré et fermé est latéral broyeuse de porte LeFig Voir D’ENTRAÎNEMENT Commande LA DE Réglages Fig Voir D’ENTRAÎNEMENT CommandeGazon À Sedeuton Votre Utiliser CommentGazon À Tondeuse Votre SUR Connaissez Cpsc Sécurité DE Normes DES Exigences LES RencontreAccessoires LES Installer ’HIVER L’ENTREPOSAGE PendantProtéger LA Pour Heures 48 Pendant Chargée Batterieunepaschargeranemoteurla ImportantZonga À Sedeuton Votre Monter CommentCarton DU Gazon Tondeuse LA Enlever PourClient DU Responsabilités Produit DE SpécificationsGénérale Entretien Carburant DU Sûre Manipulation EnfantsGénéral Fonctionnement Tespen LES Dans FonctionnementPropriétaire du Manuel

87521HVE specifications

The Husqvarna 87521HVE is an advanced lawn mower designed for homeowners looking for a reliable and efficient solution for maintaining their lawns. This model combines robust engineering with innovative features, making it an excellent choice for both small and medium-sized lawns.

One of the standout features of the Husqvarna 87521HVE is its powerful engine. Equipped with a reliable 160cc Honda engine, the mower delivers consistent performance, ensuring that it can tackle various grass types and terrains. The engine is not only powerful but also designed to be fuel-efficient, which helps reduce operating costs over time.

The Husqvarna 87521HVE features a 21-inch cutting deck that allows for a wide cutting path, which can significantly reduce mowing time. The cutting deck is made from high-quality steel, ensuring durability and longevity. Additionally, the mower's cutting height is adjustable, offering seven different positions ranging from 1 inch to 4 inches. This versatility allows users to customize the cut according to the specific needs of their lawn.

Another innovative technology featured in the Husqvarna 87521HVE is the AutoWalk™ assists. This self-propelling technology allows users to control the mower's speed with ease, offering a comfortable mowing experience without the need for excessive physical effort. The mower adjusts its pace according to the user's walking speed, making it particularly user-friendly.

The ergonomic handlebar design ensures that users can maneuver the mower effortlessly while also reducing fatigue during extended use. The handlebar can be quickly folded for easy storage, an essential feature for those with limited garage space.

For convenience, the Husqvarna 87521HVE comes with a large 2.6-bushel grass catcher that can be easily detached for quick emptying. This feature means users can spend less time stopping to empty the collector, allowing them to focus more on mowing the lawn.

In terms of maintenance, the Husqvarna 87521HVE is designed with user-friendly access points for easy oil changes and spark plug replacements. This makes routine maintenance more manageable and extends the life of the mower.

In summary, the Husqvarna 87521HVE is a high-performance lawn mower that combines power, efficiency, and user-friendly features. Its advanced technology, durable construction, and ergonomic design make it an excellent investment for anyone serious about lawn care. Whether you're tackling a small yard or a more extensive property, this mower is equipped to deliver outstanding results.
Top Page Image Contents