Husqvarna 6522SH owner manual Service and Adjustments, To Adjust Cutting Height, Rear Deflector

Page 12

SERVICE AND ADJUSTMENTS

CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

REAR DEFLECTOR

The rear defl ector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the defl ector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT (See Fig. 13)

1.Remove drive cover and belt keeper.

2.Remove belt from gearcase pulley by pushing down on pulley and rolling belt off it.

3.Turn lawn mower on its side with air fi lter and carburetor down.

4.Remove blade and debris shield.

5.Remove belt from engine pulley on crankshaft.

DRIVE

COVER

BELT

 

KEEPER

PUSH

 

DOWN

BELT

FIG. 13

TO REPLACE DRIVE BELT (See Fig. 13)

1.

Install new belt on engine pulley.

 

2.

Reinstall debris shield and blade.

 

3.

Return mower to upright position.

 

4.

Install new belt on gearcase pulley.

 

5.

Reinstall belt keeper and drive cover.

 

NOTE: Always use factory approved belt to assure fi t and

 

long life.

12

TO ADJUST HANDLE (See Figs. 14 thru 16)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

SQUEEZE

 

TO ADJUST

 

LOWER HANDLE

MOUNTING PIN

HANDLE

HAIRPIN

BRACKET

COTTER

FIG. 14

MOWING

MOWING

POSITION

POSITION

HAIRPIN

COTTER

HANDLE

MOUNTINGBRACKET

PIN

LOW POSITION

HIGH POSITION

FIG. 15

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 6522SH Safe Operation Practices for Walk-Behind Mowers II. Slope OperationGeneral Operation III. ChildrenTable of Contents Assembly HOW to SET UP Your Lawn MowerTo Install Attachments To Remove Lawn Mower from CartonMeets Cpsc Safety Requirements OperationKnow Your Lawn Mower HOW to USE Your Lawn Mower Engine SpeedEngine Zone Control To Convert MowerBefore Starting Engine To Empty Grass Catcher See FigADD OIL See Fig ADD Gasoline See Fig To Stop EngineTo Start Engine Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USELawn Mower Cleaning Clean Under Drive CoverEngine MufflerService and Adjustments To Adjust Cutting HeightRear Deflector Storage CarburetorHandle See Figs Other Fuel SystemEngine OIL CylinderTroubleshooting Points Problem Cause CorrectionPage KEY Part Description Page KEY Part Description Husqvarna

6522SH specifications

The Husqvarna 6522SH is a powerful, efficient, and reliable lawn mower designed for homeowners and landscaping professionals alike. Built with advanced technology, this mower brings precision and ease to lawn care, making it a popular choice in its category.

At the heart of the Husqvarna 6522SH is its robust engine. The model is powered by a reliable 163cc Honda engine, known for its longevity and low emissions. This engine delivers dependable performance, ensuring a consistent cut and the power needed to tackle tough grass or uneven terrains. The self-propelled feature allows users to maintain control while maneuvering through various inclines without the added strain of pushing.

One of the standout features of the Husqvarna 6522SH is its 22-inch cutting deck. This wide deck allows for increased efficiency, enabling the mower to cover more ground in less time. The deck is constructed from durable materials designed to withstand the rigors of frequent use while providing excellent cutting results. Additionally, the mower features a 3-in-1 cutting system: mulching, bagging, and side discharge options. This versatility allows users to choose the best method for their lawn care needs, promoting a healthier yard.

The Husqvarna 6522SH also includes ergonomic handles designed for user comfort. The adjustable handle height accommodates different user preferences, ensuring a more relaxed mowing experience and reducing fatigue over extended periods of use. The folding handle feature adds convenience, allowing for easier storage of the mower when not in use.

Another remarkable aspect of the Husqvarna 6522SH is its advanced safety features. It is equipped with a blade brake system that stops the blade almost instantaneously when the operator releases the handle, minimizing the risk of accidents.

In terms of maintenance, the Husqvarna 6522SH is designed with user-friendly features that make upkeep straightforward. The easy-access air filter and oil drainage system streamline the maintenance process, extending the lifespan of the mower.

Overall, the Husqvarna 6522SH combines power, versatility, and user-friendly features. Whether you're maintaining a small yard or managing a larger landscape, this mower is engineered to deliver superior results, making it a valuable addition to any gardening toolkit. With its blend of efficiency and innovation, the Husqvarna 6522SH stands out as a reliable choice for lawn care enthusiasts.
Top Page Image Contents