Husqvarna 917.374456 Assembly / PRE-OPERATION, Toremovemowerfromcarton, HOW to SET UP Your Mower

Page 6

ASSEMBLY / PRE-OPERATION

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TOREMOVEMOWERFROMCARTON

1.Remove loose parts included with mower.

2.Cut down two end corners of carton and lay end panel down flat.

3.Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.

4.Roll lawn mower out of carton and check carton thorougly for additional loose parts.

HOW TO SET UP YOUR MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.

1.Raise lower handle section to operat- ing position and squeeze the bottom ends of lower handle towards each other until the pin in handle can be inserted into one of the three height adjustment holes.

2.Remove protective padding, raise up- per handle section into place on lower handle and tighten both handle knobs.

3.Remove any packing material from around control bar.

Your lawn mower handle can be adjusted for your mowing comfort. Refer to “AD- JUST HANDLE” in the Service and Adjust- ments section of this manual.

Operator

MOWING

presence

POSITION

control bar

 

 

LIFT

 

UP

Handle pin

SQUEEZE

Handle bracket

TO ASSEMBLE GRASS CATCHER

1.Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top.

2.Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.

Frame handle

LIFT

UP

Upper

Vinyl

Frame

handle

 

bindings

opening

Handle knob

Lower handle

6

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CON- VERT MOWER” in the Operation section of this manual.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Rotary Lawn Mower Table of Contents Safety RulesIV. Safe Handling of Gasoline General ServiceIII. Children Do notWarranty Limited WarrantyProduct Specifications AccessoriesAssembly / PRE-OPERATION HOW to SET UP Your MowerToremovemowerfromcarton Meets Cpsc Safety Requirements OperationKnow Your Lawn Mower To Adjust Cutting Height Drive Control HOW to USE Your Lawn MowerDrive Control Adjustment Engine SpeedSimple Steps to Remember When Converting Your Lawn Mower To Convert MowerTo Empty Grass Catcher Attach Fuel CAP Cartridge Before Starting EngineADD OIL ADD GasolineMowing Tips To Stop EngineTo Start Engine Mulching Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Before Each USELawn Mower Repair Parts Husqvarna Rotary Lawn Mower - Model NumberKEY Part Description Husqvarna Rotary Lawn Mower - Model Number KEY Part Briggs & Stratton 4-CYCLE Engine Model Number 128602-1102-E1Carburetor Replacement Engine KEY Part NO. no Description Briggs & Stratton 4-CYCLE Engine Engine Power Rating Information Get it fixed, at your home or ours

917.374456 specifications

The Husqvarna 917.374456 is a robust, versatile riding lawn mower that caters to both home and professional users. Known for its durability and performance, this model stands out with a blend of power, efficiency, and user-friendly features.

One of the standout features of the Husqvarna 917.374456 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this mower delivers the necessary torque and horsepower to tackle even the toughest grass conditions. With an engine size of 24 horsepower, users can expect smooth and consistent performance, enabling them to tackle large lawns with ease.

The 917.374456 boasts a 54-inch cutting deck, allowing for a wider cutting path, which significantly reduces mowing time. The deck is designed with durability in mind, featuring a reinforced steel construction that can withstand the rigors of regular use. Additionally, the deck height can be easily adjusted with a lever, giving users the flexibility to customize their cut according to the type of grass and the season.

Another notable technology featured in the Husqvarna 917.374456 is its hydrostatic transmission. This feature allows for seamless speed control without the need for shifting gears. Users can effortlessly adjust their speed while mowing, ensuring that they can maintain a steady pace even on uneven terrain.

The mower also stands out for its intuitive dashboard, which displays crucial information like fuel level, battery charge, and engine diagnostics. This assists users in maintaining their mower and ensuring optimal performance.

For added comfort, the Husqvarna 917.374456 is equipped with an ergonomically designed seat that provides ample back support during long mowing sessions. The steering wheel is also adjustable, allowing users to set it at a comfortable height.

Safety features are paramount in this model, with an automatic blade engagement system that ensures the blades stop rotating when the operator leaves the seat. This crucial safety mechanism protects against potential accidents during operation.

In summary, the Husqvarna 917.374456 combines power, versatility, and user-friendly features, making it a top choice for those seeking efficiency and durability in their lawn care equipment. Whether you’re tackling an expansive backyard or a professional landscape, this riding mower offers the reliability and performance needed to keep your lawn looking its best.
Top Page Image Contents