Husqvarna 394XP manual Changing a broken or worn starter cord, Starter device assembly

Page 30

MAINTENANCE

Starter device

!WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

• Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

•Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the

starter cord on to the pulley. Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

• Lift the starter pulley. (See, Changing a broken or worn starter cord). The recoil spring is disassembled from the starter device, with its inside facing down. Tap the starter lightly against a working bench or similar.

•Put a new recoil spring in the right position. If the spring pops out when assembling, it should be mounted again, out and in towards the centre.

•Lubricate the recoil spring with thin oil. Assemble the

starter pulley, and tension the recoil spring.

Starter device assembly

•Assemble the starter device, by pulling the starter cord out first, then place the starter against the

crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 394XP 101 90KEY to Symbols SymbolsContents Safety Instructions Chain SAW Safety EquipmentPersonal Protective Equipment Chain brake and front hand guard Throttle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the automatic brake Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening your chain and adjusting raker clearance General information on sharpening cutting teethSharpening cutting teeth General advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilChecking wear on cutting equipment Checking chain lubricationLubricating the clutch drum bearing Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed General Safety Precautions Min m10 ft Basic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? Assembly Mounting guide bar and chainFuel Handling FuelmixFuelling Min 3 mCold engine Start and StopStart Warm engineMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springAir filter Adjustment of the oil pumpNeedle bearing maintenance Spark plugHeated handles Centrifugal cleaning Air InjectionCooling system Winter useWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data 394XPFederal Emission Control Warranty Statement Your Warranty Rights Obligations1998W48

394XP specifications

The Husqvarna 394XP is a powerful chainsaw designed for professional use, catering to the demands of loggers and forestry workers. Launched as part of Husqvarna's XP series, the 394XP offers a perfect blend of performance, durability, and ergonomic design, making it an outstanding choice for heavy-duty cutting tasks.

One of the standout features of the 394XP is its robust engine. It is equipped with a 94 cc, two-stroke engine that delivers impressive power while maintaining efficient fuel consumption. This high-output engine ensures that users can tackle demanding jobs with ease, whether it’s felling large trees or processing timber. The chainsaw also features a high chain speed, which enhances cutting performance and efficiency.

The 394XP is designed with user comfort in mind. It includes an adjustable oil pump, which allows for better control over oil flow and helps prolong the lifespan of the bar and chain. Additionally, the chainsaw boasts a lightweight design, which minimizes user fatigue during prolonged use. The ergonomic handle is designed to provide an optimal grip, ensuring maximum control and comfort during operation.

In terms of advanced technologies, the Husqvarna 394XP integrates the Air Injection system. This innovative technology helps to reduce wear and tear on the engine by separating larger dust and debris particles before they reach the air filter. This results in less frequent maintenance, ensuring the chainsaw operates smoothly over extended periods. The chainsaw also features the LowVib® system that significantly reduces vibrations, further enhancing comfort and allowing for longer usage without strain.

The chainsaw is fitted with a durable, forged cutting chain that provides sharp and precise cuts. Coupled with a guide bar that is available in various lengths, users can choose the optimal configuration for their cutting needs. The quick-release air filter makes maintenance simpler and faster, ensuring that the saw remains in peak condition.

In summary, the Husqvarna 394XP stands out in the world of professional chainsaws due to its exceptional power, innovative technologies, and user-centric design. It offers reliability and efficiency, making it an essential tool for anyone in the forestry and logging industries. Whether faced with the toughest cutting tasks or everyday maintenance work, the 394XP is engineered to perform at the highest level, empowering users to accomplish their work quickly and effectively.
Top Page Image Contents