Marantz CC4300 manual Troubleshooting, Problem, Possible Cause, Remedy

Troubleshooting

If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.

English
	Problem		Possible Cause		REMEDY
	No power	•	The AC input cord is disconnected.	•	Connect the cord securely.
		•	The POWER switch is not pressed	•	Press the POWER button to ON.
			correctly.
	No play	•	The disc is loaded upside down.	•	Reload the disc with the printed
					side up.
		•	Dirty disc.	•	Clean the disc.
		•	Defective or deeply scratched disc.	•	Load another disc.
	No sound	•	Incorrect connections.	•	Make connections correctly.
		•	Incorrect operation of the amplifier.	• Operate the amplifier correctly.
		•	The " ; " indicator lights up.	•	Press the PLAY or PAUSE button
					to cancel the pause mode.
	Poor or distorted sound	•	The unit is connected to the	•	Make connections correctly.
			PHONO input jacks of the amplifier.	•	Check the connections and connect
		•	Poor connections.
					all cords securely.
	Sound skips	•	Defective or deeply scratched disc.	•	Play another disc.
		•	This unit is placed on a surface that	•	Place this unit on a stable surface.
			is subject to vibration or physical
			shock.
	Programming or deleting	•	The disc is dirty or badly scratched.	•	Try again with a scratch-free disc.
	does not perform.	•	The programming or deleting	•	Try again.
			procedure is not correct.	•	Check the number of the programmed
		•	The number of the programmed
			selections is 32.		selections.
	“Error” is displayed.	•	Incorrect operation.	•	Press the OPEN/CLOSE button to
					open and close the disc tray or press
					the POWER switch to turn the power
					off and on.

28