Husqvarna 346XP 351 manual Cutting equipment designed to minimise kickback, Bar, Saw chain

Page 11

SAFETY INSTRUCTIONS

1Cutting equipment designed to minimise kickback

Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Use only the bar and chain combinations recommended in the ”Technical data” section.

The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything.

By using cutting equipment with “built-in” kickback protection and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

A Bar

The smaller the tip radius the smaller the kickback zone and the lower the chance of kickback.

B Saw chain

A saw chain is made up of a number of links, which are available in standard and low-kickback versions.

None

Standard Low-kickback

CUTTING LINK

DRIVE LINK

SIDE LINK

Combining these links in different ways gives different degrees of kickback reduction. In terms of kickback reduction alone, four different types of link are available.

Kickback reduction

Cutting link

Drive link

Side link

LOW

STANDARD

HIGH

EXTRA HIGH

C Some terms that describe the bar and chain

When the cutting equipment supplied with your saw becomes worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” section to find out which equipment is recommended for your saw.

Bar

• LENGTH (inches/cm)

•NUMBER OF TEETH ON BAR TIP SPROCKET (T).

Small number = small tip radius = low-kickback

• CHAIN PITCH (inches) The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•NUMBER OF DRIVE LINKS The number of drive links is

determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

• BAR GROOVE WIDTH (inches/mm)

The groove in the bar must match the width of the chain drive links.

•SAW CHAIN OIL HOLE

AND HOLE FOR CHAIN TENSIONER

The bar must be matched to the chain saw design.

Saw chain

• SAW CHAIN PITCH (=PITCH) (inches)

• DRIVE LINK WIDTH (mm/ inches)

• NUMBER OF DRIVE LINKS

• LEVEL OF KICKBACK REDUCTION

The level of kickback reduction offered by a chain is indicated by its model number.

See the ”Technical data” section to find the model numbers of chains that are recommended for use with your saw.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents English 346XPSymbols KEY to SymbolsContents Personal Protective Equipment Safety Instructions3a Starting Chain brake and front hand guardRight hand guard Throttle lockChain catcher Muffler Stop switchVibration damping system Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Filling with chain oil Lubricating cutting equipmentChain oil Lubricating the bar tip sprocket Needle bearing maintenanceChecking chain lubrication Checking wear on cutting equipmentWhat is kickback? HOW to Avoid KickbackDo not let go of the handles General rulesGeneral Safety Precautions 10 ft Basic safety rulesMin m Cutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatCutting trees and branches that are in tension Preparations Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is what? What is WHAT?Fitting a spike bumper AssemblyMounting guide bar and chain Fuelmix Fuel Handling10ft FuellingChain oil Min 3 mStop Start and StopStart and stop StartCarburettor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordMuffler Needle bearing maintenance Spark plugAir filter Winter use Adjustment of the oil pump Heated handles 346XPG, 351GCentrifugal cleaning Air Injection Cooling systemMonthly maintenance Weekly maintenance Daily maintenance346XP 351 Technical DataBar Chain Bar and chain combinations2001W49 114 00

346XP 351 specifications

The Husqvarna 346XP and 351 chainsaws are celebrated models within the Husqvarna lineup, recognized for their excellence in performance, efficiency, and ease of use. Designed predominantly for professional use, these chainsaws incorporate advanced technology and ergonomic features that cater to the needs of tree care specialists, landscapers, and serious woodworkers.

One of the standout features of the Husqvarna 346XP is its lightweight design, which allows for easy maneuverability and reduced fatigue during extended use. Weighing around 10.8 pounds, the chainsaw is equipped with a powerful 50.1cc, 2.8 horsepower engine, delivering exceptional cutting performance while maintaining efficient fuel consumption. The model comes equipped with a 15 to 18-inch guide bar, providing versatility for various cutting tasks, from limbing to felling small trees.

The 351 model offers similar performance metrics but is designed slightly differently, featuring an improved air injection system for cleaner operation. This system actively collects debris before it reaches the air filter, extending the service intervals and enhancing engine life. The powerful 51.7cc engine on the 351 provides a higher power output compared to the 346XP, suited for even the most demanding cutting jobs.

Both chainsaws utilize Husqvarna’s X-Torq engine technology, which reduces fuel consumption by up to 20% while lowering emissions. This not only promotes environmental sustainability but also translates into cost savings for users. The LowVib technology integrated into both models minimizes vibrations, ensuring a more comfortable experience and reducing operator fatigue.

Enhanced safety features are also paramount in both chainsaws. The inertia-activated chain brake activates quickly in the event of a kickback, providing an additional layer of protection. An adjustable oil pump allows users to control the lubrication rate, optimizing the chainsaw's performance based on the type of work being performed.

The ergonomic design of the handles enhances grip and control, allowing for precision cutting. These chainsaws are user-friendly, catering to both experienced operators and those new to chainsaw work. Overall, the Husqvarna 346XP and 351 represent a perfect blend of power, technology, and comfort, making them reliable choices for professional and serious amateur users alike.
Top Page Image Contents