Husqvarna RZ4221 BF / 967176101 warranty Operation, Training, Steering

Page 23

OPERATION

Read the Safety section and following pages, if you are unfamiliar with the machine.

Training

Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers.

This section should be reviewed in its entirety prior to attempting to move the mower under its own power. When first operating the mower or until becoming comfortable with controls, use a reduced throttle speed and reduced ground speed. DO NOT move control levers to the furthest forward or reverse positions during initial operation.

First time users should become familiar with the mower’s movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until the operator becomes comfortable with the mower controls and zero turning capability, overly aggressive maneuvers may damage turf.

IMPORTANT INFORMATION

When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.

Steering

To move forward and backward

The direction and speed of the mower’s movements are effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

First time users should push the mower (see Moving Machine By Hand in the Operation section) to an open, flat area without other people, vehicles or obstacles nearby. To move the unit under its own power, the operator must sit in the seat and start the engine (see Before Starting in the Operation section). Adjust the engine speed to idle, disengage the parking brake but do not engage the blades at this time. Rotate control levers inward. As long as the control levers have not been moved forward or backwards, the mower will not move.

Slowly move both control levers forward slightly. This will allow mower to start moving forward in a straight line. Pull the control levers back to the neutral position and the mower should stop moving.

Pull back slightly on control levers, allowing the mower to move backwards. Push the control levers forward to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically.

Then by alternating one lever slightly to the forward position and the other in the reverse position, complete the turn.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Ignition SwitchParking Brake Refueling Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingBypass Linkages Blade Control LeverSteering OperationTraining Starting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Schedule MaintenanceDaily At least Maintenance interval Once Hours Each Always use protective glasses when handling the battery BatteryCleaning battery and terminals Tire Pressures Safety SystemTo replace deck belt BeltsDeck Belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem / Cause TroubleshootingTroubleshooting Winter Storage ServiceStorage Wiring Diagram Technical Data Standard Hardware Torque SpecificationsUSA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 10 Hours Hour ServiceService Journal At Least Once Each Year Service Journal Page 115 498228 Rev a 2012-06-01

RZ4221 BF / 967176101 specifications

The Husqvarna RZ4221 BF, model number 967176101, epitomizes innovation and performance in the realm of residential lawn care. This robust zero-turn mower is designed for homeowners seeking efficiency, speed, and precision in managing their outdoor spaces.

One of the standout features of the RZ4221 BF is its powerful Briggs & Stratton engine, which provides a reliable 21 horsepower. This engine ensures optimal performance, allowing users to navigate various terrains with ease. The mower’s cutting deck spans 42 inches, allowing for a wide cutting swath that significantly reduces mowing time compared to traditional mowers. Moreover, the cutting deck is constructed from high-quality steel, ensuring durability and longevity.

The zero-turn technology in the RZ4221 BF offers exceptional maneuverability, allowing for sharp turns and easy navigation around obstacles such as trees, flower beds, and garden furniture. This feature is particularly beneficial for homeowners with intricate landscapes, as it enables precise trimming without damaging surrounding greenery.

Another highlight of this mower is its adjustable cutting height, which ranges from 1.5 to 4 inches. Users can easily customize the grass length to their preference, promoting a healthy lawn while adapting to seasonal changes. The ergonomic seat design enhances user comfort during extended mowing sessions, while the simplified dashboard provides intuitive controls for ease of operation.

The Husqvarna RZ4221 BF is also equipped with sturdy rear wheels, ensuring stability and traction on uneven terrain. This stability is accompanied by a robust frame, which contributes to the mower's durability and enhances overall performance.

In terms of maintenance, the RZ4221 BF is designed with user convenience in mind. The mower features an easy-access oil drain and integrated washing ports for hassle-free deck cleaning. Furthermore, the hydrostatic transmission system allows for smooth speed adjustments without the need for constant gear shifting, providing a smoother mowing experience.

In conclusion, the Husqvarna RZ4221 BF (967176101) combines powerful performance, innovative features, and user-friendly design, making it an excellent choice for homeowners looking to maintain their lawns effortlessly. Its robust construction, versatile cutting options, and advanced maneuverability make it a standout in the market. Whether you're tackling a small yard or a sprawling landscape, the RZ4221 BF is engineered to meet your mowing needs with efficiency and ease.
Top Page Image Contents