Husqvarna 338 XPT California, 1151439-95 General Safety Precautions, Before using a new chain saw

Page 6
GENERAL SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw

Please read this manual carefully.

Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping.

Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A chain saw is a dangerous tool

!if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand the contents of this operator’s manual.

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Long term inhalation of the

!engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

Important

IMPORTANT!

The machine is only designed for cutting wood.

You should only use the saw with the bar and chain combinations we recommend in the chapter Technical data.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

Never use any accessories other than those recommended in this manual. See instructions under the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face visor to reduce the risk of injury from thrown objects. A chain saw is capable of throwing objects, such as wood chips, small pieces of wood, etc, at great force. This can result in serious injury, especially to the eyes.

WARNING! Running an engine in a confined

!or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

WARNING! Faulty cutting equipment or the

!wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

Always use common sense

It is not possible to cover every conceivable situation you can face when using a chain saw. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. Do not hesitate to contact your dealer or us if you have any questions about the use of the chain saw. We will willingly be of service and provide you with advice as well as help you to use your chain saw both efficiently and safely. Attend a training course in

6 – English

Image 6
Contents 338XPT California Operator’s manual EPA III, CARBEnglish KEY TO SYMBOLS Symbols on the machineSymbols in the operator’s manual CONTENTS ContentsINTRODUCTION Dear customerWHAT IS WHAT? What is what on the chain saw?GENERAL SAFETY PRECAUTIONS Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard Will my hand always activate the chain brake during a kickback? Chain catcher Stop switchThrottle lock Vibration damping systemGeneral rules Cutting equipmentMuffler Cutting equipment designed to reduce kickbackWARNING! Departure from the sharpening Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth instructions considerably increases the risk of kickbackTensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethFilling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentThe clutch drum is fitted with one of the following drive sprockets ASSEMBLY Fitting the bar and chainGasoline FUEL HANDLINGFuel Two-stroke oilTransport and storage Fuel safetyFueling Long-term storageCold engine STARTING AND STOPPINGStarting and stopping Warm engineStopping Before use Basic safety rulesWORKING TECHNIQUES General working instructionsDo not let go of the handles Terms Basic cutting techniqueGeneral CuttingSafe distance Felling technique for tree topsLimbing Felling directionDirectional cuts FellingWARNING! During critical felling operations Felling cutGeneral advice Freeing a tree that has fallen badlyCutting trees and branches that are in tension How to avoid kickback What is kickback?Cutting the trunk into logs Basic settings and running in MAINTENANCECarburetor adjustment Fine adjustmentChecking brake band wear Correctly adjusted carburetorHigh speed jet H Checking the front hand guardThrottle lock Muffler StarterChanging a broken or worn starter cord Tensioning the recoil spring Air filterSpark plug Changing a broken recoil springAdjustment of the oil pump Lubricating the bar tip sprocketCooling system Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTECHNICAL DATA Technical dataRecommended original and replacement bar and chain combinations Bar and chain combinations, model 338XPT CaliforniaSaw chain filing and file gauges OWNER′S WARRANTY RESPONSIBILITIES YOUR WARRANTY RIGHTS AND OBLIGATIONSMANUFACTURER′S WARRANTY COVERAGE WARRANTY COMMENCEMENT DATEKickback safety precautions AMERICAN STANDARD SAFETY PRECAUTIONSSafety precautions for chain saw users Other safety precautionsPage Page 1151439-95 ´z+SK¶5C¨ ´z+SK¶5C¨