Husqvarna YTH1848XP owner manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Gallons

 

and type:

Unleaded Regular

 

 

Oil Type (API-SF-SJ):

SAE 30 (above 32°F)

 

SAE 5W-30 (below 32°F)

Oil Capacity:

W/ Filter:

3.8 Pints

 

W/O Filter:

3.2 Pints

Spark Plug:

Champion RYJ8Y

(Gap: .030")

 

 

Ground Speed (MPH):

Forward: 0 – 5.5

 

Reverse: 0 – 2.4

Tire Pressure:

Front: 14 PSI

 

 

Rear: 10 PSI

 

Charging System:

16 AMPS @ 3600 RPM

 

 

 

Battery:

AMP/HR:

35

 

MIN. CCA:

280

 

CASE SIZE: U1R

 

 

Blade Bolt Torque:

45-55 FT. LBS.

 

 

 

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized service center/ department. We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your tractor.

Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muffler is available through your nearest authorized service center/department (See REPAIR PARTS section of this manual).

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

6-9

OPERATION

10-15

MAINTENANCE SCHEDULE

16

MAINTENANCE

16-19

SERVICE AND ADJUSTMENTS

20-25

STORAGE

26

TROUBLESHOOTING

27-28

REPAIR PARTS - TRACTOR

30-45

4

Image 4
Contents YTH1848XP Safety Rules Safety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonAssemble Gauge Wheels to Mower Deck See Fig Install Mower and Drive Belt See Figs To Attach Nose Roller See FigCheck Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Towing Carts and Other ATTACH- MentsCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning To Install Mower Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Drive Belt To Replace Mower Blade Secondary Drive Belt See FigTransmission REMOVAL/REPLACEMENT To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig To Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model Number YTH1848XP HAU18H48G, Product no 17Electrical KEY Part NO. NO. Description Chassis and Enclosures Repair Parts Drive Drive Steering Assembly Repair Parts Engine Repair Parts Seat Assembly Decals Wheels & TiresMower Lift Repair Parts Mower Deck Repair Parts Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation 532 19 00-50 Rev 4.22.04 RD/MH
Related manuals
Manual 4 pages 16.66 Kb