Marantz PM-15S1 manual Attenuation ATT, How to Set Attenuation Level, HOW to USE and SET Features

Page 21

HOW TO USE AND SET FEATURES

ATTENUATION (ATT.)

Attenuation is a one-touch feature for reducing volume level. When the ATT button on either the PM-15S1 or the remote controller is pressed, the volume level is attenuated. When the PM-15S1 is shipped from the factory, the attenuation level is set to –20 dB, but it can be set to –20 dB, –40 dB or –∞.

1.When the ATT button on either the PM-15S1 or the remote controller is pressed, “ATT” flashes on the display and the volume level is reduced. When the ATT button is pressed again or the volume is increased/decreased from the controls, the mode is canceled and the original volume level is restored.

2.When the volume level is at -∞(muted) and the ATT button is pressed, the below display appears for about 3 seconds and attenuation is not applied.

7How to Set Attenuation Level

Attenuation level cannot be set from the remote controller.

1.Press and hold the ATT button on the PM-15S1 for 2 seconds or longer.

The attenuation level will appear on the display.

DISPLAY button

2.

press of the ATT button on the PM-15S1.

ENGLISH

Set the attenuation level. The setting changes with each

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.When the desired attenuation level setting appears on the display, leave it unchanged for approximately 2 seconds or longer to enter the setting. Once entered, the display returns to the volume level indication.

HOW TO OPERATE THE SIDE

ILLUMINATION LAMP

The illumination lamp has an always-ON mode and an always- OFF mode. In the always-ON mode, the illumination lamp turns ON/OFF in sync with the display.

1.With the illumination lamp lit, press and hold the DISPLAY button for 3 seconds or longer. The illumination lamp goes out and the always-OFF mode is engaged.

2.To cancel the always-OFF mode and turn the illumination lamp ON, press and hold the DISPLAY button for 3 seconds or longer.

ATT button

Illumination lamp

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model PM-15S1 User Guide Risk of Electric Shock Do not Open Read Before Operating Equipment Important Safety InstructionsContents Equipment Mains Working Setting Before USECopyright Power FeaturesAmplifier FunctionsBI-WIRING Connection Wiring Speaker CableBefore Making Connections Complete BI-AMP ConnectionBefore Making Connections ITU International Telecommuni Cation UnionConnections Connections Remove CH speaker Remove Front Panel Names and Functions of PartsNames and Functions of Parts DisplayRear Panel Operating Mode Switch C.B.S. IN/OUT JacksAC in Socket Remote Controller Sound Mode Operatable range of Remote controllerPlayback Basic OperationDisc Playback on an Super Audio CD Player Disc Playback on an Analog Record PlayerBasic Operation RecordingAbout the BI-AMP Mode HOW to USE and SET FeaturesAbout Fcbs Fcbs Connection with a PM-11S1HOW to Operate the Side Illumination Lamp How to Set Attenuation LevelHOW to USE and SET Features Attenuation ATTTrimming HOW to SET ID Remote Control Jacks About Protective Circuits TroubleshootingTroubleshooting Error MessagesOthers RepairsCD/LINE/RECORDER Specifications & Dimensional Drawings09/2008 00M22AJ851310 mzh-g
Related manuals
Manual 28 pages 22.32 Kb

PM-15S1 specifications

The Marantz PM-15S1 is a high-performance integrated amplifier that stands as a testament to Marantz’s commitment to audio excellence. Known for its sophisticated design and robust capabilities, this model has garnered acclaim among audiophiles and casual listeners alike.

One of the standout features of the PM-15S1 is its high current capability, which ensures that it can drive a wide range of speakers with ease. This amplifier is designed with a unique power supply that incorporates a massive toroidal transformer and high-quality filtering capacitors. This configuration provides steady and clean power, allowing for dynamic sound reproduction without distortion, making the PM-15S1 suitable for various musical genres.

The heart of the PM-15S1 lies in its advanced amplification technology. It employs a fully discrete current feedback circuit that has been meticulously crafted to deliver a natural and transparent sound. This circuit configuration minimizes signal degradation, allowing for precise audio playback that is faithful to the original recording. Additionally, the amplifier features a high-speed, high-current output stage that enhances its performance, particularly in reproducing intricate musical passages.

One significant characteristic of the PM-15S1 is its versatility. Equipped with multiple input options, including balanced XLR and unbalanced RCA connectors, users can easily integrate various audio sources. The amplifier also features a built-in phono stage, accommodating both moving magnet and moving coil cartridges, which is a boon for vinyl enthusiasts.

The construction of the PM-15S1 reflects Marantz’s dedication to quality. The amplifier is housed in a meticulously crafted chassis that reduces vibration and interference, ensuring that the audio signal remains pure. Its elegant design, complemented by luxurious finishes, makes it an attractive addition to any audio setup.

Another essential aspect of the PM-15S1 is its user-friendly interface. The front panel includes intuitive controls for volume, balance, and source selection, allowing for a straightforward user experience.

In conclusion, the Marantz PM-15S1 integrated amplifier is a remarkable piece of audio engineering that combines cutting-edge technologies with superior sound quality. Its robust features and sophisticated design make it a perfect choice for those who seek an enriching listening experience, whether it be for casual listening or critical sound reproduction.
Top Page Image Contents