Husqvarna 308 manual Test docking with the charging station

Page 34

3. INSTALLATION

3.9Test docking with the charging station

Before using the robotic lawnmower, check that the robotic lawnmower can follow the guide wire all the way to the charging station and easily docks with the charging station. Perform the test below.

1.Open the control panel cover by pressing the STOP button.

2.Place the robotic lawnmower close to the point where the guide wire is connected to the boundary wire. Place the robotic lawnmower about 2 metres from the guide wire, facing the guide wire.

3.Select Home mode by pressing the house symbol key and pressing OK when the cursor is at Home. Press Start and close the cover.

4.Check that the robotic lawnmower follows the guide wire all the way to the charging station and that it docks with the charging station. The test is approved only if the robotic lawnmower is able to follow the guide wire the entire distance to the charging station and docks at the first attempt. If the robotic lawnmower is unable to dock on the first attempt, it will automatically try again. The installation is not approved if the robotic lawnmower needs two or more attempts to dock with the charging station. In this case, check that the charging station, the boundary wire and the guide wire are installed in accordance with the instructions in Chapters 3.2, 3.4 and 3.6.

5.The robotic lawnmower will stay in the charging station until Auto or Man mode is selected. See 5.1 Operation selection on page 40.

The guide system must first be calibrated if the above test is to provide a satisfactory result. See 3.8 First start-up and calibration on page 33.

34 - English

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Husqvarna Automower 305/308 OPERATOR’S Manual Page Table of Contents Memo Serial number PIN code Dealer Dealers telephone numberIntroduction and safety IntroductionSymbols on the product Symbols in the Operator’s Manual TextSafety Instructions UseTransport Maintenance Presentation What is what? Numbers in the illustration representCapacity FunctionMowing technique Working method Movement pattern Locating the charging stationCarry out the installation in the following steps InstallationPreparations Installation of the charging station Ideal position for the charging station3020-043 3012-932 3012-933 Connecting the transformer Min 30cm/12 Installation and connecting the charging station Charging the batteryDo not tread or walk on the charging stations base plate Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries Boundaries within the working area Passages when mowingSecondary areas Slopes Laying the boundary wire Installation of the guide wire onLaying the boundary wire in towards the charging station Splicing the boundary wireConnecting the boundary wire Installation of the guide wire Laying and connecting the guide wire Maximum Checking the installation Installation onFirst start-up and calibration Use Memo on page 4 to make a note PIN codeTest docking with the charging station Charging a flat battery UseStandby Using the timerExample Starting SecurityStopping Switching offAdjusting the cutting height RestartControl panel Auto Operation selectionHome MANMulti-choice buttons Main switchNumbers Browse between menus Menu functionsMain menu Number seriesMenu structure Timer Work hoursInstallation Guide widthWide ProportionDistance Rarely can be selected for Remote startTest settings Test OUTSecurity TestFunction We recommend using the High security level at all timesMedium Settings Reset user settings Installation proposals and settings Garden examplesOften Guide width MediumProportion Often Proportion Medium is selected Proportion Medium Guide widthSelect Proportion Rarely as Proportion Rarely Remote start Guide width Medium Winter storage MaintenanceCleaning on Robotic lawnmowerAfter winter storage ServiceCleaning Charging stationWheels Chassis and blade discChassis BodyEvent of a thunderstorm Transport and removalBlades Battery Replacing the battery3020-044 Troubleshooting MessagesTroubleshooting Troubleshooting Indicator lamp in the charging station Light Cause ActionSymptoms Lawnmower runs, but Symptoms Cause Action RoboticLawnmower vibrates Blade disc doesFinding breaks in the loop wire Guide 3018-054 3018-055 Technical Data Guarantee terms Environmental informationEU Declaration of Conformity EU Declaration of conformity Only applies to EuropeEU Declaration of Conformity Page Original Instructions
Related manuals
Manual 74 pages 31.6 Kb Manual 2 pages 60.87 Kb

308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents