3.Owner’s (Your) Responsibilities. To preserve your rights under this Limited Warranty, you must demonstrate rea- sonable care and use of the product, including, following the preventative maintenance, storage, fuel and oil usages as prescribed in the enclosed operator’s manual. For example, the following items are the Owner’s responsibility and are not covered by this Limited Warranty:
a.
b.Adjustments after the first (30) thirty days of purchase and beyond, such as throttle cable, belt guides adjustments.
c.Preventative maintenance as outlined in the operator’s manual.
In addition, you must cease using the product immediately upon any failure or damage.
The product should be taken to an authorized Husqvarna servicing dealer prior to any further use.
4.Damages resulting from normal aging, wear and tear or neglect are NOT covered. The Limited Warranty does not cover damage other than that resulting from defects in material or workmanship. The following are NOT considered defects in material or workmanship, and therefore are NOT covered.
(a)Abrasion to mower decks;
(b)Tires damaged by external punctures;
(c)Natural discoloration of materials due to ultraviolet light;
(d)Damage to cutting equipment by way of contact with, rocks, or other
In addition, this Limited Warranty does not cover damages, malfunctions or failures resulting from abuse or neglect of the product related to or including any of the following:
(e)Failure to provide/perform required maintenance services as prescribed in the operator’s manual;
(f)Abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, use of unauthorized attachments, Lack of lubrication or engine failure, due to the use of oils that do not meet Engine manufacturer’s specifications;
(g)Use of gasohol, containing methanol (wood alcohol). Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE (Methyl/Tertiary/Butyl/Ether) is approved;
(h)Use of ether or any starting fluids;
(i)Pressure cleaning or steam cleaning the product;
(j)Use of spark plugs other than those meeting emission performance requirements listed in the operator’s manual;
(k)Tampering with engine speed governor or emission components, or running engines above specified and recommended engine speeds as listed in your operator’s manual;
(l)Operation of the unit with improperly installed/removed or modified cutting shields, guards, or safety devices;
(m)Any removed/damaged air filter, excessive dirt, abrasives, salt water, moisture, corrosion, rust, varnish, stale fuel, or any adverse reaction due to incorrect storage procedures;
(n)Failures due to improper set up,
(o)Dirt contaminated grease or oil, use of incorrect type of greases or oils, failure to comply with recommended greasing intervals, water or moisture damage, and/or improper storage;
(p)Sprayers pumping or spraying caustic or flammable materials, lack of or broken strainers; or
(q)Continued use of product, after initial operational problem or failure occurs.
HOW TO OBTAIN SERVICE
5.Authorized Husqvarna Servicing Dealer/Center. In order to obtain warranty coverage it is your responsibility (at your expense) to deliver or ship your Husqvarna unit to an authorized Husqvarna Servicing Dealer/Center and arrange for
6.Documentation Required. You must maintain and present Proof of purchase (including date, product model and, if applicable, engine serial number) to an authorized Husqvarna Servicing Dealer for warranty service under this Limited Warranty. Proof of purchase rests solely with the
Husqvarna Consumer Outdoor Products N.A., Inc.; Husqvarna Professional Products, Inc. |
|
9335 Harris Corners Parkway, Charlotte, NC 28269 | 575 49 |
24