Husqvarna EZF 3417/ 965879301 manual Operation, Training, Steering, Before Starting

Page 21

operation

Operation

Read “Safety Instructions” section and following pages, if you are unfamiliar with the machine.

Training

Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities.

We suggest that this section be reviewed in its entirety prior to attempting to move the mower under its own power. Additionally, we suggest when first operating the mower, use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during initial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to Zero Turn mowers to become familiar with the mower’s movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to overly aggressive maneuvers.

Steering

To move forward and backward

The direction and speed of the mower’s movements is effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

IMPORTANT INFORMATION

When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.

First time users should push mower (see “Moving by Hand” in the “Operation” section) to an open, flat area, without other people or vehicles/obstacles nearby. In order to move unit under its own power, the operator must be in the seat, start engine (see “Before Starting” in “Operation” section), adjust engine speed to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. As long as the control levers have not been moved forward or backwards, mower will not move. Slowly move both control levers forward slightly. This will allow mower to start moving forward in a straight line. Pull back on control levers to the neutral position and mower should stop moving. Pull back slightly on control levers, this will allow mower to start moving backwards. Push forward on control levers to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically. Then by alternating one lever slightly to the forward position and the other in the reverse position.

Before Starting

English-21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operators Manual Page Contents Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before General Operation SafetyNever take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer Responsibilities TransportMotion Control Levers ControlsRefueling Seat adjustment leverUSE Full Throttle When MOWING, for best Ignition SwitchHour Meter Choke ControlBlade switch Circuit breakerParking Brake Deck Height Lift Lever Training OperationSteering Before StartingStarting the Engine Steering controls in the outward, locked neutral position Follow this procedure Weak BatteryTo attach jumper cables To remove cables, reverse orderRunning Ensure that no one is near Mower when engaging blade SwitchOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Maintenance ScheduleMaintenance Daily Weekly Maintenance Interval Least Hours Once Each Battery To clean battery and terminalsReplacing battery Ignition System Safety SystemChecking and Adjusting the Throttle Cable Checking and Adjusting the Choke CableEngine Cooling Air Intake Replacing the Air Filter Fuel Filter Tire Pressures Fuel Pump Air FilterBelts Deck belt installationDeck belt Deck belt removalPump Belt Belt installationCutting Blades Replacing pump beltBlade replacement To level deck Mower Deck AdjustmentsNose Roller Cleaning Caster WheelsHardware Change transaxles transmission filters General LubricationLubrication Schedule LubricationEngine Oil Changing the Engine Oil Deck outer spindleChanging the Engine Oil Filter Checking the Oil LevelProblem Cause TroubleshootingEnglish-49 Service StorageWinter Storage Schematics Rear Half of Wiring Harness Technical Data EngineTransmission Overall dimensions EquipmentProductivity Torque Specifications AccessoriesCE requirements USA requirementsService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service English-60 English-61 English-62 At Least Once Each Year English-64 English-65 English-66 Page 115 128727 IR 08/18/08

EZF 3417/ 965879301 specifications

The Husqvarna EZF 3417, model number 965879301, is a versatile and powerful zero-turn lawn mower that combines exceptional performance with user-friendly features. Designed for both residential and light commercial use, the EZF 3417 presents an efficient solution for maintaining lawns of various sizes and complexities.

One of the standout features of the Husqvarna EZF 3417 is its robust engine. Powered by a reliable and fuel-efficient gas engine, this mower delivers strong performance, allowing for quick cutting and maneuverability. The engine is designed with durability in mind, ensuring longevity and minimizing maintenance needs. With this level of power, users can tackle dense grass and uneven terrain with ease.

The mower boasts a cutting deck equipped with a 42-inch blade, which allows for a precise and clean cut. This mid-sized deck is ideal for residential yards, providing a balance between performance and accessibility in tighter spaces. The exclusive cutting technology ensures an even distribution of grass clippings, promoting a healthier lawn and reducing the need for raking or bagging.

Another highlight of the EZF 3417 is its intuitive zero-turn steering capability, which allows the operator to navigate around obstacles with exceptional agility. The lever-controlled steering system simplifies turning and maneuvering, making it easy to cut in tight corners and along flower beds without damaging plants.

Comfort is also an essential consideration in the design of the Husqvarna EZF 3417. It features an ergonomic seat with ample padding and support, allowing users to mow for extended periods without discomfort. Additionally, the mower is equipped with convenient controls that are easy to reach and operate, ensuring that even novice users can quickly learn how to handle the machine.

Durability is a key characteristic of the EZF 3417. Its sturdy construction and high-quality materials ensure it can withstand the rigors of frequent use. The mower's design also considers ease of maintenance, with accessible components for routine checks and repairs.

In summary, the Husqvarna EZF 3417 is a powerful, efficient, and user-friendly zero-turn lawn mower. With its robust engine, precise cutting capabilities, intuitive steering, and durable construction, it stands out as an ideal choice for homeowners and light commercial users seeking a reliable and high-performing lawn care solution.
Top Page Image Contents