Husqvarna EZ4216HO, EZ4217KAA, EZ4217KAA, EZ4822BI, EZ4822BI, EZ5221KAA, EZ5424BI manual

Page 45

MAINTENANCE

Replacing Air Filter Honda Engine

If the engine seems weak or runs unevenly, the air filter may be clogged. If run with a dirty air filter, the spark plugs can become fouled, distrupting operation.

For this reason, it is important to replace the air filter regularly (see the heading Maintenance Schedule for the proper service interval).

Cleaning/replacing the air filter is carried out as follows:

WARNING!

The engine and the exhaust system, become very hot during operation. Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes.

Inspection

Remove the air cleaner cover and inspect the filter elements. Clean or replace dirty filter elements. Always replace damaged filter elements.

1.Remove the two air cleaner covers bolts from the air cleaner cover and remove the cover.

2.Remove the foam filter element.

3.Remove the paper filter element from the grid.

4.Inspect both air filter elements and replace them if they are damaged. Always replace the paper filter element at the scheduled interval (200 hours).

5.Clean the air filter elements if they are to be reused.

Paper air filter element: Tap the filter element severval times on a hard surface to remove dirt, or blow compressed air (not exceeding 207 kPa, 30psi) through the filter element from the inside. Never try to brush off dirt; brushing will force dirt into the fibers.

1

2

3

4

5

6

7

8019-013

1.Air Cleaner Cover Bolts

2.Air Cleaner Cover

3.Foam Filter Element

4.Grid

5.Paper Filter Element

6.Air Cleaner Base

7.Air Duct

IMPORTANT INFORMATION

Operating the engine without an air filter, or with a damaged air filter, will allow dirt to enter the engine, causing rapid engine wear. This type of damage is not covered by the Distributor’s Limited Warranty.

English-43

Image 45
Contents Operators manual Page OPERATOR’S Manual ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsMotion Control Levers Parking BrakeSeat adjustment bolts TrackingFuel Shut Off Valve Refueling Fuses By pass linkageIgnition Switch Hour MeterChoke Control Blade switch USE Full Throttle When Mowing , forThrottle Control Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Mower deck’s anti-scalp rollers should be evenly adjustedOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Nance Once Maintenance Each Before After 100 To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting the Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air Filter Briggs & Stratton EngineReplacing the Air Filter Kawasaki Engine Replacing Air Filter Honda Engine Replacing Heavy Duty Air Filter Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Checking the Parking Brake Faulty adjustment can cause an accidentChecking the V-belts Deck beltDeck belt installation IZT belt Belt installationTo replace IZT Integraded Zeroturn Transaxle belt IZT belt removalChecking the Blades Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightLeveling To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingRemoval and installation of caster wheel Caster WheelsTo adjust parking brake Tracking adjustmentMower is tracking to the right Mower is tracking to the leftLubrication LubricationLubrication Schedule Change transaxles transmission filtersLubricating in Accordance with the Lubrication Schedule Lubricating the CablesFront Wheel Mount Front Wheel BearingsEngine Oil Changing the Engine Oil Deck outer spindleChecking the Oil Level Transaxle Transmission Fluid Change Changing the Engine Oil FilterExpansion Tank Purging Procedures Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-64 Storage ServiceStorage Winter StorageWiring diagram Wiring DiagramsTechnical Data Technical DataEZ4216/968999290 EZ4217/968999291 Productivity API SF, SJ EZ5221/968999292 EZ4822/968999293Gauge w/10 gauge skirts Gauge stamped EZ5424/968999294 English-72 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 Page 112443R0111/29/05

EZ5221KAA, EZ4216HO, EZ4127KAA, EZ4217KAA, EZ4822BI, EZ4822BI, EZ5221KAA, EZ4216HO, EZ4217KAA, EZ4217KAA, EZ4822BI, EZ4822BI, EZ5221KAA, EZ5424BI specifications

Husqvarna, a recognized leader in outdoor power equipment, offers a range of compact riding mowers designed to provide exceptional performance and convenience for homeowners. Among their popular models are the EZ4216HO, EZ4217KAA, EZ4822BI, EZ5221KAA, EZ5424BI, and EZ4127KAA. Each model incorporates innovative features and technologies that cater to diverse lawn care needs.

The EZ4216HO is equipped with a reliable engine that ensures robust performance, offering efficient cutting power to tackle various types of grass. Its hydrostatic transmission provides smooth and precise control, making it easy to maneuver around obstacles and tight corners. With a cutting width of 42 inches, it is ideal for medium-sized lawns, allowing for quick and effective mowing.

Similarly, the EZ4217KAA model further enhances the mowing experience with its advanced deck design, which optimizes air circulation for even grass cutting. The model features an adjustable cutting deck, allowing users to customize the cutting height for different grass types and conditions. The comfortable seat and ergonomic controls ensure that mowing can be done for extended periods without discomfort.

For larger lawns, the EZ4822BI and EZ5424BI models are formidable options. The EZ4822BI boasts a powerful engine and a 48-inch cutting width, enabling efficient mowing while covering more ground. The inclusion of a high-back seat adds to user comfort, making longer jobs less strenuous. This model also features an integrated mowing system, ensuring optimal cutting performance regardless of lawn conditions.

The EZ5221KAA offers versatility with multiple cutting options, including side discharge, mulch, and rear bagging capabilities. This makes it an excellent choice for those looking to maintain a pristine lawn. Its robust construction and reliable components guarantee durability and longevity, providing value over time.

Lastly, the EZ4127KAA model is engineered for easy operation, equipped with automatic features that simplify the mowing process. This model excels in both functionality and user-friendly design, ensuring that lawn care becomes a hassle-free task.

Overall, Husqvarna's riding mowers, including models like EZ4216HO, EZ4217KAA, EZ4822BI, EZ5221KAA, and EZ5424BI, combine powerful engines, ergonomic design, and innovative cutting technologies. Their commitment to quality and performance makes them a preferred choice for homeowners who demand efficiency and reliability in their lawn care equipment. With a Husqvarna mower, achieving and maintaining a beautiful lawn becomes a much more attainable task.