On-Screen Manual > Scanning Guide > ScanGear (Scanner Driver) Screens > Scan Tab
Scan Tab
On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images. Display the dialog to select
next action is selected by default.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear (scanner driver) screen for another scan when scanning is
completed.
Display the dialog to select next action
Select this to open a dialog box and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
Advanced Mode Settings
Select the Enable 48/16 bit Output checkbox to display Color(48bit) in Color Mode on the Advanced
Mode tab. This checkbox is not selected by default.
Note
When Color(48bit) is selected for Color Mode, deselecting this checkbox changes Color(48bit) to
Color.
Sayfa 205 / 268 sayfaScan Tab