Cooling Your Room
You must select the Cool mode if you wish to adjust the :
◆Cooling temperature
◆Fan speed when cooling
1If necessary, press the
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps.
◆The air conditioner starts up in the Cool mode.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
lt will start up normally after three minutes.
2If the
Result: ◆ The indoor unit beeps each time you press the
◆The air conditioner runs in the Cool mode.
Note You can change modes at any time.
3To adjust the temperature, press the
Result: ◆ Each time you press the
-The temperature is adjusted by 1OC.
-The indoor unit beeps.
◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.
◆If the room temperature reachs the set temperature, the air conditioner stops cooling, but the fan is still operating.
4Select the fan speed by pressing the
or
Automatic(rotated : | ➔ | ➔ | ➔ | ) |
Low |
|
|
|
|
Medium |
|
|
|
|
High |
|
|
|
|
Result: ◆ Each time you press the | button, the indoor unit beeps. |
|
5To control the direction of the air flow, refer to page 16.