Solving Common Problems
Before contacting the
They may save you the time and expense of an unnecessary call.
Problem | Explanation/Solution |
|
|
The air conditioner does not operate at all
Check that the breaker used for the air conditioner is switched on.
Check that the indoor unit is turned on;
if necessary press the
Check whether the Timer indicator on the indoor unit is switched on. If so:
-Wait until the
-Cancel the Timer (see page 15 for further details)
The air conditioner does not operate with the remote control
Check that there are no obstacles between you and the indoor unit.
Check the remote control batteries.
Check that you are close enough to the indoor unit (7 metres /yards or less).
No beep is heard when you press the
Check that you are pointing the remote control at the remote control sensor of the indoor unit.
Replace the remote control batteries if necessary.
The air conditioner does not cool
Check that the correct operating mode has been selected (Cool, Auto).
The room temperature may be too low or too high.
Dust may be blocking the air filter guard; refer to page 18 for cleaning instructions.
Check that there is no obstacle in front of the outdoor unit.
The fan speed does not | Check that the operating mode is set to Cool or Fan ; |
change when you press the | in the Auto, Turbo, Long and Dry mode, the fan speed is controlled |
button | automatically. |
The air flow direction does not change when you press the
Check that the air conditioner has been switched on; if necessary, press the
The Timer is not correctly triggered
Check that the timer has been programmed correctly; see page 15.
Odour is permeated in the | Air the room. |
room during air conditioning |
|
|
|