Selecting Fan Mode
Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode.
1Press the
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last. The indoor unit beeps.
2Press the
Result: | The indoor unit beeps each time you press the | button. |
| The air conditioner runs in Fan mode. |
|
| The temperature is set automatically. |
|
Note | You can change modes at any time. |
|
3 Press the
Low Medium High
Result: Each time you press the
4 To control the airflow direction, refer to page 20.
Selecting the Turbo Function
You can select the Turbo Function if you want to cool or heat your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected.
1Press the
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last. The indoor unit beeps.
2 Press the | button. |
Result: The temperature and fan settings are adjusted automatically.
The air conditioner cools or heats the room as quickly as possible.
After 30 minutes, the air conditioner is reset automatically to the previous setting.
You can select the Turbo function in Auto, Cool and Heat mode. If you select this function in Dry or Fan mode, the mode changes to Auto mode.
3 Press the
Result: The air conditioner is reset automatically to the previous setting.
4 To control the airflow direction, refer to page 20.
08'VIVACE_CIS_28587A_IB_E.indd 16 |