using advanced functions
USING THE SMART SAVER FUNCTION
This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode.
1.Press the Smart Saver button on the remote control
while the air conditioner is operating in Cool mode.
Smart Saver indicator and air swing indicator appears automatically on the remote control display.
The air flow blades move up and down.
If the current set temperature is lower than 24ºC, it will automatically raise to 24ºC.
•Smart Saver function is only available in Cool mode.
•When Smart Saver function is activated, temperature range will be limited to 24ºC~30ºC.
•If the desired temperature is lower than 24ºC, turn off the Smart Saver function by pressing the Smart Saver button again.
•Temperature/Fan speed can also be adjusted (see step 3~4 on page 15 for instructions).
•Air flow can be adjusted manually (see page 19 for instructions).
•If you press the Mode button while the Smart Saver function is on, it will cancel the function.
To deactivate the Smart Saving function.
1.Press the Smart Saver button on the remote control while Smart Saver function is on.
Smart Saver function you set will be canceled and Smart Saver indicator will disappear on the remote control display.
26_ using advanced functions
|
| ||
|
| ||
|
|
|
|