Choosing the installation location
Where it is not exposed to strong wind
Well ventilated and dustless places
Where possible keep out of sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong enough to hold the product weight
Where there is no risk of flammable gas leakage
When installing the unit at a high place be sure to fix the unit legs
3 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
Install the unit horizontally
Place where drained water does not become any problem.
Place with no plants (especially climbing plants) and where small animal can not access.
Outdoor unit should not be place higher than 2.4 m or directly under eaves for accessibility for service and OH&S reasons.
• Avoid the following places to prevent malfunction of the unit
- Where there is machine oil | - Salty environment such as seaside areas |
- Where sulfide gas exists | - Other special atmosphere areas |
Outdoor |
|
Unit |
|
Outer wall | A |
| |
Indoor |
|
Unit |
|
Cut insulation to have rainwater drained
125mm or more
100 mm or more
125 mm or more
You can select the direction of draining (left or right).
Wrap the refrigerant pipes and the drain hose with the absorbent pad and vinyl tape. Refer to page 52 for further details.
Make an
'L' m as maximum pipe length and 3 m as minimum pipe length. (It will reduce noise and vibration)
'L' meters maximum total pipe length
'H' meters maximum total pipe height
Model | Pipe Length | Pipe Height | ||
Minimum | Maximum | Maximum | ||
| ||||
✴✴12✴✴ | 3 | 15 | 7 | |
✴✴18✴✴ | ||||
|
|
| ||
✴✴24✴✴ 3 20 8
The appearance of the unit may be different from the diagram depending on the model.
|
| 2/17/2015 2:13:58 PM | |
|
| ||
|
|
|
|