NOTE
\\ Depending on your Windows version, the information may differ.
Wireless Network
You can setup a wireless network connection in three ways:
When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected.
ĞĞWireless (general) - Automatic
To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 18.
1.Select Wireless (general) in the Network Settings screen, and then press the v button.
The player searches for and then displays a list of the available networks.
Settings
Display | Network Settings | 1/11 | ||
Audio | Select your wireless router from the list: | |||
Network | XXXXX | WEP |
| |
System | XXXXX | WPA |
| |
Language | XXXXX | WPA |
| |
Security | XXXXX | WPA |
| |
XXXXX | WEP | Refresh | ||
General | ||||
|
|
| ||
Support | a Previous | m Move " Enter | ' Return | |
2.Select the desired network, and then press the v button.
The Security screen appears.
3.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.
4.When done, select Done at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.
NOTE
\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.
ĞĞWireless (general) - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 18.
1.Select Wireless (general) in the Network Settings screen, and then press the v button.
The Network Status screen appears. The player attempts to verify the network connection and fails.
| Settings |
| Network Settings |
|
|
| |||
| Display |
|
| MAC Address | XX:XX:XX:XX:XX:XX |
|
| ||
| Audio |
|
| IP Address | 0.0.0.0 |
|
| ||
| Network | KT_WLAN |
| Subnet Mask | 0.0.0.0 |
|
| ||
|
| Gateway | 0.0.0.0 |
|
| ||||
|
|
| |||||||
| System |
|
| DNS Server | 0.0.0.0 |
|
| ||
| LanguageIP auto setting failed. Try the following to set up the IP automatically: |
|
| ||||||
|
| - Ensure that the DHCP server is enabled on the router, then restart router. |
|
| |||||
| Security- Contact your Internet service provider for more information. |
|
|
| |||||
|
| Alternatively, set up the IP manually by selecting IP Settings. |
|
|
| ||||
| General |
|
| Retry |
|
|
|
| |
| Support | IP Settings |
|
|
|
|
| ||
|
|
| OK |
|
| ||||
|
|
| a Previous | <Move "Enter 'Return |
|
| |||
|
|
|
|
|
|
|
|
|
|
2.Select IP Settings on the bottom of the screen, and then press the v button. The IP Settings screen appears.
3.Select the IP Mode field, and then set it to Manual.
the IP Settings values" on page 18.
4.Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.
5.When done, highlight OK, and then press the v button.
The Security screen appears.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.
7.When done, select Done at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.
ĞĞWPS(PBC)
To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 18.
1.Select WPS(PBC) in the Network Settings screen, and then press the v button.
The player searches for and then displays a list of the available networks.
2.Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified.
Settings 04