ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1. | Select Network Status. The product |
| searches for a network, and then displays the |
2. | connection failed message. |
On the bottom of the screen, select IP | |
| Settings, and then press the v button. |
3. | The IP Settings screen appears. |
Select the IP Setting field, and then press the | |
4. | v button. |
Select Enter manually in the IP Setting field, | |
5. | and then press the v button. |
Select a value to enter (IP Address, for | |
| example), and then press the v button. |
| Use the number keypad on your remote |
| control to enter the numbers for the value. |
| You can also enter numbers using the ▲▼ |
| buttons. Use the ◄► buttons on the remote |
| control to move from entry field to entry field |
| within a value. When done with one value, |
6. | press the v button. |
Press the ▲ or ▼ button to move to another |
Wireless Network
You can set up a wireless network connection in four ways:
-- Wireless Automatic -- Wireless Manual -- WPS(PBC)
-- WPS(PIN)
When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.
Settings 04
value, and then enter the numbers for that |
value following the instructions in Step 5. |
7. Repeat Steps 5 and 6 until you have filled in |
all values. |
NOTE
\\ You can get the Network values from your Internet provider.
8. When finished entering all the values, select |
OK, and then press the v button. The |
Network Settings
Select your network type. |
|
Network type | Wireless |
Wireless network |
|
iptime23 |
|
|
|
iptime |
|
solugen_edu#2 |
|
Refresh WPS(PBC)
You can connect your Blu- ray player to the internet. Please select which wireless network to use.
product verifies the network connection and |
then connects to the network. |
5.Select the desired network, and then press the v button.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.