Connections
Connecting to an Audio System (5.1 Channel Amplifier)
1.Using the audio cables, connect the 5.1 ANALOG
AUDIO OUT (Front R, Front L, CENTER, SUBWOOFER, REAR L, REAR R) terminals on the rear of the
ANALOG AUDIO IN (Front R, Front L, CENTER, SUBWOOFER, REAR L, REAR R) terminals of your Amplifier.
2.Using the video signal cable(s), connect the VIDEO,
3.Turn on the
4.Press the input select button of the Amplifier to select external input in order to hear sound from the
Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)
1.If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the
2.Using the video signal cable(s), connect the VIDEO,
3.Turn on the
4.Press the input select button of the Amplifier to select external input in order to hear sound from the
5.1 Channel Amplifier
■Please turn the volume down when you turnon the Amplifier. Sudden loud sound mayNOTE | cause damage to the speakers and your ears. |
|
■Please set the audio in the menu screen according to the Amplifier. (See pages 40 to 41)
■The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
■If you have the unit connected via the 5.1channel analog outputs and play a DVD Dolby Digital disc, sound will only be heard from the Front Left and Right speakers.
■If you have the unit connected via any analog output and play a DTS DVD disc, no sound will be heard. To hear sound, the digital output must be connected and set to Bitstream.
22 - English
or