Adjusting Your LCD Monitor
Automatic Save
Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustments for up to 5 user modes. It has ten factory preset or preload modes, one for each signal frequency as listed in “Display Modes” on page 21.
If you have made no adjustments, the OSD disappears and the monitor does not save anything. To exit without saving the changes you have made, press the EXIT button before the 2 seconds elapse.
Direct-Access Features
The features described in this section can be accessed quickly, at the touch of one button. Once you finish making adjustments to a feature, push the EXIT button to turn off the menu or allow the OSD to
Brightness
|
|
| Brightness | Follow these instructions to adjust the brightness of | ||||
|
|
|
|
| 99 |
| the monitor’s display. | |
|
|
|
|
|
| 1 | With the menu off, push the | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| button. The brightness display appears. | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| 2 | Push the “+” button to increase the |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| brightness; push the | |
the brightness.
English 10