Samsung DVD-HD936 DVD-HD936/XSG Controlling a TV with the Remote, Troubleshooting, TV Codes, REFERENCE, JVC, CODE, CODE, SONY, LG_2, Page, e.g), BRAND, BRAND, SHARP, MIVAL, Action, TOSHIBA

Turn on the TV.

Point the DVD’s remote at the TV.

00168V-HD936(GB)-2 8/21/03 11:04 AM Page 46

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to your brand.

TV Codes

Troubleshooting

Before requesting service (troubleshooting), please check the following.

CODE	BRAND	CODE	BRAND
01	SAMSUNG_4	19	TOSHIBA
02	SAMSUNG_6, LG, LOEWE, PHILIPS,	20	PHILIPS, PHONOLA, RADIOLA
	FINLUX, YOKO, LOEWE OPTA,	21	TOSHIBA, GRUNDIG, CGE,
	MITSUBISHI, PHONOLA, RADIOLA,		IMPERIAL, MIVAR
	SCHNEIDER	22	PHILIPS, SABA, BANG&OLUFSEN,
03	SAMSUNG_1		BRIONVEGA, FINLUX,
04	SAMSUNG_2		FORMENTI, LOEWE OPTA, METZ,
05	SAMSUNG_3		WEGA, PHONOLA, RADIOMARELLI,
06	SAMSUNG_5		SINGER, SINUDYNE
07	TOSHIBA	23	NOKIA, PANASONIC, SABA, PIONEER,
08	PANASONIC_4		REZ, SELECO, SALORA
09	GRUNDIG, BLAUPUNKT, SIEMENS	24	HITACHI, NORDMENDE, PANASONIC,
10	SHARP		SABA,TELEFUNKEN, THOMSON,
11	HITACHI		CONTINENTAL, EDISON
12	SANYO, AKAI, FISHER	25	PANASONIC_2
13	HITACHI, SABA, THOMSON, NORDMENDE	26	PANASONIC_3
14	HITACHI, NORDMENDE, SABA,	27	PANASONIC_6
	TELEFUNKEN, THOMSON, BRANDT,	28	TELEFUNKEN
	FERGUSON, PIONEER, TELEAVA	29	MIVAL
15	SONY	30	LG_2
16	TOSHIBA, SANYO, SHARP, SONY,	31	SHARP_2
	MITSUBISHI	32	JVC
17	TOSHIBA, GRUNDIG, FINLUX	33	THOMSON ASIA
18	TOSHIBA	34	THOMSON ASIA

Problem

No operations can be performed with remote.

Disc does not play.

5.1channel sound is not being reproduced.

The	icon appears on
screen.

Disc Menu doesn’t appear.

Play mode differs from the Setup Menu selection.

The screen ratio cannot be changed.

Action

•	Check the batteries in the remote. May need replacing.
•	Operate the remote control at a distance of no more than 20 feet.
•	Remove batteries and hold down one or more buttons for several
	minutes to drain the microprocessor inside the remote to reset it.
	Reinstall batteries and try remote again.
•	Ensure that the disc is installed with the label side facing up.
•	Check the region number of the DVD.
•	5.1 channel sound is reproduced only when the following conditions
	are met. :
	1) The DVD player is connected with the proper amplifier
	2) The disc is recorded with 5.1 channel sound.
•	Check whether the disc being played has the “Dolby 5.1 ch” mark
	on the outside.
•	Check if your audio system is connected and working properly.
•	In a SETUP Menu, is the Audio Output set to Bitstream?
•	The features or action cannot be completed at this time because:
	1. The DVD’s software restricts it.
	2. The DVD’s software doesn’t support the feature (e.g., angles).
	3. The feature is not available at the moment.
	4. You’ve requested a title or chapter number or search time that is
	out of range.
•	Check if the disc has a Menu.
•	Some of the functions selected in the Setup Menu may not work
	properly if the disc is not encoded with the corresponding function.
•	The Screen Ratio is fixed on your DVDs.

Page

P4

P7

P12

P41

P18

P38~44

P42~43

1

2

3 While holding the TV POWER button down, enter the code for your brand.

e.g) For SAMSUNG 4 TVs

While holding down the TV POWER button, enter 0 and then 1.

4 If the TV turns off, setup is complete.

Enter other codes of the same brand if the first code does not work.

5 To operate the TV, use the “TV Function Buttons” described on page 11.

NOTE

The remote may not be able to control every model TV of the brands listed.

No audio.

Forgot password

If you experience other problems.

•	Make sure you have selected the correct Digital Output in the Audio
	Options Menu.
•	Press power on from a cold start with no disc in the unit. Press the
	STOP (	) and PLAY (	) buttons simultaneously on the front panel
	for three seconds. The Select Menu Language display will appear.
	Select the desired language button. Press the MENU button on the
	remote control to select the Parental Mode. The Parental Mode is now
	unlocked as indicated on the display. Press the DOWN button to select
	Parental. Press ENTER and the Create Password display will appear.
	You can now set your rating level and change your password to a new
	number.
•	Go to the contents and find the section of the instruction book that
	contains the explanations regarding the current problem, and follow
	the procedure once again.
•	If the problem still cannot be solved, please contact your nearest
	authorized service center.

P41

P44

REFERENCE

46 47