Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
|
| Method 1 | Method 2 | Method 3 | Method 4 |
| Method 5 |
| |||
|
| Good | Better | Best |
| Best |
| Optimum |
| ||
Basic Audio | picture | picture | picture | picture |
| picture |
| ||||
TV |
|
|
|
|
|
|
|
|
|
|
|
|
| AV | Scart |
|
|
|
|
|
| ||
|
| Cables | Video |
|
|
|
|
| |||
| Cable |
| Cable | (not | Cables |
|
|
|
|
| |
|
|
|
| supplied) |
|
|
|
|
|
| |
|
|
|
| OR | OR | OR |
|
|
|
|
|
DVD |
|
|
|
|
|
|
|
|
|
|
|
Player |
|
|
|
|
| Pr | Pb | Y | Pr | Pb | Y |
R | L |
|
|
|
|
|
|
|
|
|
|
ANALOG AUDIO OUT |
|
| VIDEO OUT |
| COMPONENT VIDEO OUT |
| COMPONENT VIDEO OUT |
| |||
Audio Output | Video Output | SCART Jack | Component Video | Component Video | |||||||
Jacks |
|
| Jack | Jack |
|
| Jacks |
|
| Jacks |
|
|
|
|
|
|
| (Interlace) |
| (Progressive) |
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to the
Method 2
DVD Player + TV with
(The Video Output in Setup Menu must be set to the
Method 3
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD Player + TV with interlace Scan Component Video Jacks
(The Video Output in Setup Menu must be set to the Component
Method 5
DVD Player + TV with Progressive Scan Component Video Jacks.
(The Video Output in Setup Menu must be set to the Component
•If you want to convert Video Output to the Progressive Scan, you have to first connect Video or
•If Component
Important Note
•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
•Depending on your TV, the Method of connection may differ from the illustration above.
Playing a Disc
Before Play
•Turn on your TV and press the TV/VIDEO button to select the video mode.
•Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up : If you want to select the language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.)
Play
1.Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2.Place a disc gently into the tray with the disc’s label facing up.
3.Press the PLAY/PAUSE (
4.Stopping Play
Press the STOP (
5.Removing Disc
Press the OPEN/CLOSE button.
6.Pausing Play
Press the PLAY/PAUSE (
-Screen stops, no sound.
-To resume, press the PLAY/PAUSE (
7.Step Motion Play (DVD only)
Press the STEP button on the remote during play.
-Each time the button is pressed, a new frame will appear.
-No sound is heard during STEP mode.
-Press the PLAY/PAUSE (
direction.)
8.Slow Motion Play (DVD only)
Press and hold the
slow motion play for 1/8, 1/4 and 1/2 of normal speed.
-No sound is heard during slow mode.
-Press the PLAY/PAUSE (
-Reverse slow motion play will not work.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press the PLAY (
Note
•If the player is left for 5 minutes in pause mode, it will stop.
•If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off. (Automatic
•If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY (
•This
|
|
|
|
|
|