Setting Up the Audio
Options
Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use.
1.Press the MENU button.
2.Press the / buttons to select Audio Setup, then
press the or ENTER button.
3.Press the / buttons to select the desired item, then press the or ENTER button.
|
|
|
|
|
|
|
|
|
|
| .. Audio Setup Page .. |
| ||
| Dolby Digital Out | PCM | ||
| MPEG2 Digital Output | PCM | ||
| Dynamic Compression | On | ||
| PCM Down Sampling | On | ||
.. Audio Setup Page .. |
|
|
Dolby Digital Out | PCM | PCM |
MPEG2 Digital Output | PCM | BItstream |
Dynamic Compression | On |
|
PCM Down Sampling | On |
|
❶Dolby Digital Out
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Outputs Dolby Digital via the digital output.Select Bitstream when connecting
to a Dolby Digital Decoder.
❷
-PCM : Converts to PCM(2CH) audio.
-Bitstream : Converts to
Digital Audio Output.
❸Dynamic Compression
-On : To select dynamic compression.
-Off : To select the standard range. ❹ PCM Down Sampling
-On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
-Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all sig
nals will be output without any changes.
Note
Even when PCM Down sampling is Off
•Some discs will only output down sampled audio through the digital outputs.
•To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1.Press the MENU button.
2.Press the / buttons to select Display Setup page then press the or ENTER button.
3.Press the / buttons to select the desired item, then press the or ENTER button.
|
|
|
|
|
|
|
|
|
|
|
|
.. Display Setup Page .. |
| ||
Tv Aspect | LB | ||
Screen Message | On | ||
Video Output | |||
Black Level | Off | ||
TV System | PAL | ||
|
|
|
|
❶TV Aspect
Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).
-4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central por- tion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| .. Display Setup Page .. |
|
|
| ||
| Tv Aspect | LB | 4:3 Pan&Scan | |||
| Screen Message | On | 4:3 letter Box |
| ||
| Video Output | 16:9 Wide | ||||
| Black Level | Off |
|
| ||
| TV System | PAL |
|
| ||
|
|
|
|
|
|
|
24