Samsung DVD-VR370 DVD-VR370/EDC, DVD-VR370/XEC, DVD-VR375/EDC Step 4 : Playing, Step 3 : Recording, When using a DVD+R disc, Step 5 : Editing a recorded disc, When using a DVD-RW/-Rdisc in VR Mode

Step 3 : Recording

There are two different recording methods, Direct Recording (recording a programme you are currently watching) and Timer Recording.

Timer recording is classifi ed as follows : Recording mode : HQ (high quality mode), HSP, SP (standard quality mode), LSP, ESP, LP, EP, SLP (Long duration mode) according to the recording mode.

When recording is set in the AUTO mode, the best quality picture is recorded with regards to the remaining time on the disc.

Step 4 : Playing

To start playback, select the title you want to play from the title list.

A DVD consists of sections called titles, and sub sections called chapters.

During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically regardless of the disc type when it is set at the setup menu.

Step 5 : Editing a recorded disc

Editing on discs is easier than conventional video tapes.

The recorder supports many different edit functions, possible only with DVDs.

With a simple and easy edit menu, you can operate various edit functions, such as delete, dubbing, rename, lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/-RW/-R in VR mode)

With this DVD Recorder & VCR, you can create a new playlist on a disc and edit it without the original, pre-existing recording.

Step 6 : Finalising & Playing on other DVD components

To play your DVD on other DVD components, fi nalising may be necessary. First, fi nish all editing and recording operations, then fi nalise the disc.

When using a DVD-RW/-R disc in VR Mode

Although fi nalising is generally unnecessary when playing the disc on a VR Mode compatible component, a fi nalised disc should be used for playback.

When using a DVD-RW/-R disc in Video Mode

The disc should be fi nalised fi rst to enable playback on anything other than this recorder. No more editing or recording can be made on the disc once it has been fi nalised.

To enable recording on the disc again, the disc must be unfi nalised.

When using a DVD+R disc

You should fi nalise the disc to play it on a component other than this DVD Recorder & VCR. No more editing or recording can be made on the disc once it has been fi nalised.

M You can finalise the disc automatically using EZ Record. (See page 38)

STARTED GETTING ●

English _13