Samsung DW60H9950FS DW60H9950FS/TR, DW60H9950FW/TR Setting up your dishwasher, 10 Delay Start, Start (Başlat), Reset (Sıfırla)

Setting up your dishwasher

Delay a cycle for up to 24 hours in one-hour increments. To increase the delay start time, press or hold the Delay Start button. The hour displayed indicates the time at which the wash will be started.

- After setting the delay time, press the START (BAŞLAT) button, and then

10 Delay Start

close the door to start the cycle.

- If you want to change the delay time once the dishwasher has started, press the Reset (Sıfırla) button and turn off the dishwasher. Then, turn on the dishwasher again and select a new cycle with a new delay setting.

To start a cycle, press the START (BAŞLAT) button before closing the door.

*Reset (Sıfırla) : To cancel a currently running cycle and drain the dishwasher,

11Start (Başlat) press and hold the START (BAŞLAT) button for three (3) seconds.

Once the dishwasher is reset, select a cycle and option, and then press

START (BAŞLAT) to restart the dishwasher.

You can select options (Self Clean, Upper, Lower, Speed Booster, Sanitize, Dry+, Delay Start) before starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.

To prevent the touchpad from losing response sensitivity, follow these instructions:

•Touch the center of each keypad using one fi nger. Do not push.

•Clean the touch control’s surface regularly with a soft, damp cloth.

•Be careful not to touch more than one touch key pad at a time, except as directed.

English - 14

DW9000H_DD68-00158F-08_EN.indd 14 2018-01-10 ￿￿ 10:56:13