Samsung DIGIMAX A4 EC-A4ZZZSAA, EC-A4ZZZSBA/E1, EC-A4ZZZSBB/E1 PictBridge

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu.

	IMAGES	: Select the pictures to be printed.
		: Setting up printing(AUTO SET/CUSTOM SET)
	PRINTER SETUP
	PRINT	: Printing pictures
	DPOF PRINT	: Printing the DPOF files
	RESET	: Initialising the PictBridge functions
Connecting the Camera to a Printer
1. Press the power button to turn the camera power on.
2. In a mode other than Voice Recording mode, press the				P 2272
	MENU button.
			SETUP
3. Press the LEFT/ RIGHT button and select [SETUP]			IMPRINT	COMPUTER
	menu tab.		SOUND	PRINTER
4. Select [USB] menu by pressing the UP/ DOWN button			USB
			BACK :	SET : OK
	and press the RIGHT button.

5.Select [PRINTER] menu by pressing the UP/ DOWN button and press the OK button.

6.Press the menu button twice and the menu will disappear.

7.Use the supplied USB cable to connect the camera to the printer as shown below.

8.Turn on the printer to connect the camera to the printer.

If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the camera status lamp(Green) will illuminate and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward.

62