Samsung DIGIMAX A50 PictBridge: Printing

PictBridge: Printing

Printing Pictures

1. Connect the camera to your printer. The USB menu

must be set to [PRINTER] before you connect the
camera to the printer.(See p.70)		PRINT
2. Use the LEFT and RIGHT buttons to select the [PRINT]
		STANDARD
menu tab.
		INDEX
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.		MOVE:	SET:OK
[STANDARD]	: Print the pictures stored in the
	memory card in set numbers. One picture is printed on one piece of
	paper.
[INDEX]	: Print multiple images on one sheet of paper.

4.The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. Press the shutter button while printing to cancel the printing and the [IMAGES] menu is displayed.

Number of pictures in a index print varies depends on the printer used.

NOW PRINTING

001/001

EXIT:SH1

DPOF PRINT : This allows you to directly print the files with DPOF information.

1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.70)	DPOF PRINT
2. Use the LEFT and RIGHT buttons to select the [DPOF	NO
PRINT] menu tab.	YES
3. Use the UP and DOWN buttons to select the desired
	MOVE:
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES]: Directly print the file with the DPOF information

Depending on the manufacturer and printer model, some menus may not be available. With a printer without supporting the DPOF, the menu is still displayed but not available.

72