Samsung DIGIMAX A55W Metering, Continuous Shooting, INFORMATION

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

[MULTI] (	) : Exposure will be calculated based on an
	average of the available light in the image
			METERING
	area. However, the calculation will be
				MULTI
	biased towards the centre of the image				SPOT
	area. This is suitable for general use.
[SPOT] (	) : Only the rectangular area in the centre
	of the LCD monitor will be metered for	[PROGRAM mode]
	light. This is suitable when the subject in
	the centre is exposed correctly, regardless of the back lighting.

INFORMATION

The default metering mode is Multi pattern metering.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, It is better to use exposure compensation.

Continuous Shooting

Select the number of pictures in continuous shooting.

- [SINGLE] : Take one picture only

-[CONTINUOUS] : Images will be taken continuously until the shutter button is released. The shooting capacity depends on the memory.

- [AEB]	: Take three pictures in a series in different
	exposures: short exposure (-0.5EV),
	standard exposure (0.0EV) and over
	exposure (+0.5EV). Use the mode if it is
	hard to decide exposure of the object.

SHOOTING

SINGLE

CONTINUOUS

AEB

[ PROGRAM mode ]

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [CONTINOUS] sub menu is selected, the flash will be off automatically.

If less than 3 pictures are available in the memory, the AEB shooting is not available.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and the blurring caused by camera shake may occur.

54