Samsung DIGIMAX 220 SE EC-D220SABA/FR, EC-D220SABA/GB BASIC, SETTING UP SHOOTING FUNCTION, The, symbol, camera condition indicator, When you have used mode dial, Indicator for the camera error

SETTING UP SHOOTING FUNCTION

Indicatorforthenumberoftheremainingshot,conditionofthecardandotherinformation

According to the condition of the camera and memory card, it is shown on LCD panel as below

camera condition indicator

(	) Indicator on LCD panel blinks if you press the power button
- (	) Indicator is canceled when the camera is ready for the operation.

When the memory card is set up properly.

Number of available shots remaining is determined by the picture selected and image resolution. - The maximum available pictures will be 9999(subject to memory size and picture quality).

When the memory card is not set up properly
(	) symbol flashes on the location of available shot indicator.
- If there is no card, a beep will sound
When a memory card is set and there is short capacity
symbol (	) will flash on the location of available shot indicator.
- If the sound function is on, the card memory capacity short warning will sound
When you are saving the *.tif file form image in the memory card
The (	) indicator blinks on the LCD panel
- When the saving to the memory card is completed, the (		) indicator is canceled.

Indicator for the camera error

When the error occurs while the operation of the camera, the indicator ( ) on the photographing information indicator blinks. Refer to the page 70 about the detail information about the occurrence of the error.

Reference

When the memory capacity is low, it will not be possible to take a picture.

A warning will sound regarding low memory or no card, and will sound in the following events.

When you have pressed the shutter button.When you have used mode dial.

35

BASIC