Samsung DIGIMAX 220 SE EC-D220SABA/FR, EC-D220SABA/GB About hardware, Error messages, FAQ, About USB, When the error message display, We recommend SanDisk memory card, if possible

FAQ

About USB

How do I know my computer supports USB InterfaceCheck the USB port in your computer or keyboard.Check [Universal serial bus controller] in Device Manager.

Do as follow for checking [Universal serial bus controller] Trace [start setting controller system

Device Manager Universal serial bus controller]. In addition, there must be USB Host Controller and USB root hub under [Universal serial bus controller].

Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME or later.

In case that all the conditions that mentioned above are set, the computer can support USB interface.

About hardware

Booting is impossible when a new CF CARD is inserted.

The camera power is turned off continuously with BOOT message and E05 error message on the LCD panel when an unspecified memory card is inserted.

Some manufacturer’s memory card is not recognized in this camera.We recommend SanDisk memory card, if possible.You should change the memory card with SanDisk memory card.

Error messages

When the error message display

If the error message display in the middle of camera operation, turn the camera power off and turn the camera power on again.

If the error message display, the camera power is turned off automatically.

If the error message display continuously, format the memory card in PLAY mode and insert again.

99

SOFTWARE