Samsung i8 SAMSUNG I8 Fn button: Exposure compensation, Fn button: White balance, balance, custom white, white balance, Compensating Exposure, Using the Custom White Balance

Fn button: White balance

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.

1.Select the CUSTOM () menu of the White Balance and place a sheet of white paper in front of the camera so

that the LCD monitor shows only white.

2. MENU/OK button: Selects previous
custom white
balance.	White paper
Shutter button: saves new custom
white balance.

–The custom white balance value will be applied, starting with the next picture you take.

–The user configured white balance will be remain effective until it is overwritten.

Fn button: Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions.

You can also select the exposure value by using the Fn button.Compensating Exposure1.Press the Fn button, and then use the

Up/Down button to select the exposure compensation ( ) icon. The exposure compensation menu bar will appear as shown.

2.	Use the Left/Right button to set the
			￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	desired exposure compensation factor.	￿￿￿	￿￿￿ ￿￿ ￿￿￿ ￿￿
3.	Press the Fn button again. The value			￿
	you set will be saved and the Exposure Compensation setup mode will
	close. If you change the exposure value, the exposure indicator (				)
	will be displayed on the bottom of the LCD monitor.

A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor should appear white or you may not get good pictures.

041