Connecting to a Power Source
Insert the battery as shown- If the camera does not turn on after youhave inserted battery, please check whether the battery is inserted with the correct polarity (+ /
- When the battery chamber cover is opened, do not press the battery
chamber cover by force. This may cause damage to the battery chamber cover.
There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Low battery | Low battery | Battery | ||||
|
|
|
|
| capacity | capacity | |||||
| The battery is | empty | |||||||||
Battery status | (Prepare to | (Prepare to | |||||||||
(Recharge | |||||||||||
fully charged | recharge | recharge | |||||||||
| or use spare | ||||||||||
|
|
|
|
| or use spare | or use spare | |||||
|
|
|
|
| battery) | ||||||
|
|
|
|
| battery) | battery) | |||||
|
|
|
|
|
|
Inserting the memory card
Insert the memory card as shown.- Turn off the camera’s power before inserting the memory card.
- Have the front of the memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD monitor).
-Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.